Bedienungsanleitung Ariston AVTF129 (Seite 15 von 72) (Englisch, Französisch, Spanisch, Polnisch)

23658

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

 Keep this instruction manual in a safe place for

future reference. Should

the appliance be sold,

transferred or moved,

make sure the

instruction manual

accompanies the

washing machine to

inform the new owner

as to its operation and

features.

 Read these

instructions carefully:

they contain vital

information on

installation, use and

safety.

Unpacking and

levelling

Unpacking

1. Unpack the washing

machine.

2. Check whether the washing machine has been

damaged during transport. If this is the case, do not

install it and contact your retailer.

3. Remove the four protective screws and the

rubber washer with the respective spacer, situated

on the rear of the appliance (see figure).

4. Seal the gaps using the plastic plugs provided.

5. Keep all the parts: you will need them again if the

washing machine needs to be moved to another

location.

Warning: should the screws be re-used, make sure

you fasten the shorter ones at the top.

 Packaging materials are not children's toys.

Levelling

1. Install the washing machine on a flat sturdy floor,

without resting it up against walls, furniture cabinets

or other.

2. If the floor is not perfectly level, compensate for

any unevenness by tightening or loosening the

adjustable front feet (see figure); the angle of

inclination, measured according to the worktop,

must not exceed 2°.

Levelling your appliance correctly will provide it with

stability and avoid any vibrations, noise and shifting

during operation. If it is placed on a fitted or loose

carpet, adjust the feet in such a way as to allow

enough room for ventilation beneath the washing

machine.

Putting your appliance in place and moving it.

If your washing machine is equipped with a special

set of retractable wheels you can easy move it. To

lower the wheels and thus move the appliance

effortlessly, just pull the lever, situated on the left-

hand side beneath the base. Once the appliance is

in the required position, put the lever back in place.

The washing machine is now firmly in place (see

figure).

Electric and water connections

Connecting the water inlet hose

1. Insert seal A into the end of the inlet hose and

screw the latter onto a cold water tap with a 3/4

gas threaded mouth (see figure).

Before making the connection, allow the water to

ServiceTroubleshootingPrecautions CareProgrammes DetergentsInstallation Description

Technical details

Model

AVTF 129

Dimensions

40 cm wide

85 cm high

60 cm deep

Capacity

from 1 to 5 kg

Electric

connections

voltage 220/230 Volts 50 Hz

maximum absorbed power 1850 W

Water

connections

maximum pressure 1 MPa (10 bar)

minimum pressure 0.05 MPa (0.5 bar)

drum capacity 42 litres

Spin speed

up to 1200 rpm

Control

programmes

according to

IEC456 directive

programme 3; temperature 60°C;

run with a load of 5 kg.

This appliance is compliant with the

following European Community

Directives:

- 73/23/CEE of 19/02/73 (Low

Voltage) and subsequent amendments

- 89/336/CEE of 03/05/89

(Electromagnetic Compatibility) and

subsequent amendments

- 2002/96/CE

65 - 100 cm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ariston AVTF129 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info