Bedienungsanleitung Ariston BCO-M40 IX (Seite 6 von 17) (Englisch)

454579

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

How to Start the Appliance

NOTICE

After the appliance has been delivered, stand it in the

upright position and wait approximately 3 hours be-

fore connecting it to the electrical outlet to guarantee

that it operates properly.

Before placing foodstuffs in the refrigerator or freezer, clean

the interior well with warm water and baking soda.

Motor protection delay

This model is provided with a motor protection control

system. Therefore, if the compressor does not start

immediately upon installation, do not worry as it will

start automatically after approximately 8 minutes.

This is also what will happen every time the power

supply is interrupted, both due to a power failure or

should you switch it off yourself (to clean or defrost

your freezer, for example).

After plugging the appliance into a suitable electricity

socket, ensure the display is on with the “OFF” words in

the indication spaces concerning the two compartments

(fridge and freezer).

Freezer compartment

When the appliance is switched on (by pressing the ON/

OFF button “A” for more than two seconds), the freezer

compartment is automatically brought to the standard setting

of - 18°C. We recommend you enable the SUPER FREEZE

function to speed up the cooling process of the compartment;

when the latter has reached its optimal temperature, the

function shall be automatically disabled and you may place

your frozen food inside the compartment.

Refrig ompartment

When the appliance is switched on, the refrigerator

compartment turns on automatically, and it is brought to the

standard setting of + 5°C. We recommend you enable the

SUPER COOL function to speed up the cooling process of

the compartment: after a few hours, you may place food inside

the refrigerator.

How to use the display

Firstly, take all the advice that appears in the form of scrolling

text on the display: it will be of use to you, especially when

you make your first settings.

Temperature settings:

If the compartment concerned is switched off, the word OFF

will appear on the relative indication space on the display (G for

the refrigerator and H for the freezer). If the compartment is

switched on, then the temperature set at that time will appear.

To change it, press the MODE (D) button as many times as

necessary for the figure corresponding to the temperature set to

flash in the relative indication space. Now you can select the

new temperature to set by pressing the ADJUST/SELECT + (E)

(to increase the temperature displayed by one degree) and/or

ADJUST/SELECT - (F) (to decrease the temperature displayed

by one degree) buttons. Once you have reached the desired

temperature, you should set it by pressing the MODE (D) button

again to confirm the selection. Now the new temperature will

stop flashing and will remain fixed in the relevant indication space

on the display to indicate that the new setting has been made.

NOTE: if you do not confirm your selection by pressing the

MODE button within ten seconds of the last action

performed on the display, the latter shall go back to displaying

the temperature previously in being and indicate that no

new temperature has been set.

The temperatures set automatically are +5°C for the refrigerator

compartment and -18°C for the freezer compartment and these

are the standard temperatures for food storage.

The settable temperatures for the refrigerator compartment

range from +2°C to +8°C, whereas those for the freezer

compartment range from -18°C to -26°C. When the ECO

function is enabled, the possible settings are instead closer

to the standard ones for food storage: from +4°C to +6°C

for the refrigerator compartment and from -18°C to -20°C

for the freezer compartment. The possible increases and

decrease are still of 1°C.

When the HOLIDAY function is enabled, temperature

regulations cannot be made, but the appliance automatically

sets itself to the best setting for the situation: +12°C for the

refrigerator compartment (if enabled) and -18°C for the

freezer compartment.

How to use the functions:

ECO

Function symbol in normal operating conditions

(only green symbol lit)

Function selected (green symbol and red outline

lit)

Function enabled (green symbol and blue

background lit)

Press the MODE (D) button as many times as necessary for

the red outline of the function you wish to act on to light

up: this indicates that the function has been selected and is

ready to be enabled or disabled. Now you can act on the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ariston BCO-M40 IX Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info