Bedienungsanleitung Ariston Clas HE R (Seite 38 von 64) (Englisch)

719964

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

38 /

SETTINGS - ADJUSTMENT - PROBLEM IDENTIFICATION MENUS

2 5 3 NOT PRESENT

2 5 4 NOT PRESENT

2 5 5 NOT PRESENT

2 9 RESET MENU 2

2 9 0 Automatically resetting to the default setting in

menu 2

Reset

OK = yes

ESC = no

To reset all default parameter settings,

press the MENU button

4 ZONE 1 PARAMETER

4 0 ZONE 1 TEMPERATURE SETTING

4 0 0 Zone 1 comfort temperature setting "Comfort

ambience T"

from 10 to 30 °C 19 Activated only with the modulating

device connected (option)

4 0 1 Zone 1 reduced temperature setting "Reduced

ambience T"

from 10 to 30 °C 16

4 0 2 Heating ﬁxed temperature setting "Heating ﬁxed

temp"

from 20 to 82 °C 70 Activated only with temperature con-

trol and ﬁxed temperature

4 1 Entering access code 222 press the programming "+" button to

select 234 and press the meNu button

4 2 ZONE 1 SETTING

4 2 0 Heating appliance temperature value setting 0 = from 20 to 45°C (low temperature)

1 = from 35 to 85°C (high

temperature)

1 select in the appliance type base

4 2 1 Basic heating control type selection type depending

on the peripheral devices connected

0 = ﬁxed ﬂow temperature

1 = device On/Oﬀ

2 = ambient sensor only

3 = external sensor only

4 = ambient sensor + external sensor

1 To activate heating control, press

the AUTO button. The Auto light is

illuminate

4 2 2 Slope 0_2 to 3_5 1_5

If the external sensor is used, the boiler calculates the

most suitable heating ﬂow temperature taking the

external temperature and the type of appliance into

account.

The type of curve must be chosen according to the

type of appliance radiator and the heat losses present

in the building.

°C

100 °C

2.5 3.0 3.5 2.0

1.5

1.2

1.0

0.8

0.6

0.4

0.2

5 0 -5 -10 -15 -20 °C

External temperature

High temperature

Flow Temperature

low temperature

Ambiente t

emperature

setting v

alue

4 2 3 Parallel shift - 20 to + 20 0

To adapt the thermal curve to the appliance requirements, it is possible to perform a parallel shift of the curve in order to alter the calculated

ﬂow temperature and therefore the ambient temperature.

The shift value between - 20 and + 20 is shown on the display. Each level corresponds to a 1°C increase in the ﬂow temperature in relation to

the initial setting.

4 2 4 Compensation 0 to + 20 20

if setting = 0, the temperature taken from the ambient sensor does not aﬀect the

calculation of the setting. If setting = 20, the temperature taken has maximum

inﬂuence on the setting.

4 2 5 Zone 1 heating maximum temperature setting 35 to + 82°C 82 if parameter 420 = 1

20 to + 45°C 45 if parameter 420 = 0

4 2 6 Zone 1 heating minimum temperature setting 35 to + 82°C 35 if parameter 420 = 1

20 to + 45°C 20 if parameter 420 = 0

4 3 DIAGNOSTICS display only

4 3 0

Zone 1 room temperature

Activated only with the modulating

device connected (option)

4 3 1

Zone 1 set temperature

4 3 2

Zone 1 heat request

0=OFF

1=ON

4 3 3 NOT PRESENT

sub-menu

Parameter

Description value

default setting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ariston Clas HE R Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info