Bedienungsanleitung Ariston E-Combi One (Seite 42 von 80) (Englisch)

719960

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

42 /

SETTINGS - ADJUSTMENT - PROBLEM IDENTIFICATION MENUS

sub-menu

Parameter

Description value

default setting

2 4 BOILER PARAMETER - PART 2

2 4 3 Post-ventilation after heating request 0 = OFF

1 = ON

2 4 4 Time delay after heating temperature

increase

from 0 to 60

(minutes)

16 Activated only with thermostat

On/Off and heating control

activated

(parameter 421 - 521 - 621 = 01)

This parameter allows the time delay to be set before automatic increase of the ow

temperature calculated in increments of 4°C (max 12°C). If this parameter retains the

value 00, this function is not active.

2 4 5 Circulation pump MAX speed from 75 to 100

2 4 6 Circulation pump MIN speed from 40 to 100

2 4 7 Device indicator for heating circuit pressure 0 = temperature sensor only

1 = pressure switch at minimum

2 = pressure sensor

1 RESERVED FOR TECHNICAL

ASSISTANCE

Only if the PCB is changed

2 4 8 <Not Available>

2 4 9 External temperatura correction from -3 to +3 (°C) 0 Only active with external sensor

connected

2 5 DOMESTIC HOT WATER PARAMETER

2 5 0 COMFORT function

E-COMBI ONE

0 = deactivated

1 = timed

2 = always on

0 Timer = activated for 30 minutes

after domestic hot water draw-

off

The appliance allows the hot water heating comfort to be increased via the

“COMFORT” function.

This function keeps the secondary exchanger temperature stable when the boiler is

not in use. When the function is active, the display shows COMFORT

Note: this function can be activated and deactivated by pressing the COMFORT

button

2 5 1 Comfort Anti-cycling Time

E-COMBI ONE

from 0 to 120 (minutes) 0

2 5 2 Hot water ow delay

E-COMBI ONE

from 5 to 200 (0.5 to 20 secon-

ds)

5 Anti “water hammering”

2 5 3 Extinction of the burner in D. H. W.

E-COMBI ONE

0 = anti-scale (stop at > 67°C)

1 = + 4°C /setting

2 5 4 Post-circulation and post-ventilation after a

domestic hot water draw-off

0 = OFF

1 = ON

OFF = 3 minutes post-circulation and post-ventilation after domestic hot water draw-

off if the boiler temperature measured requires it.

ON = always on for 3 minutes post-circulation and post-ventilation after domestic

hot water draw-off.

2 5 5 Domestic hot water timer from 0 to 30 (minutes) 0

2 5 7 <Not Available>

2 5 8 <Not Available>

2 6 BOILER MANUAL SETTINGS Only to test components

2 6 0 Manual mode activation 0 = OFF

1 = ON

2 6 1 Boiler pump control 0 = OFF

1 = ON

0 Set parameter 260=1

2 6 2 Fan control 0 = OFF

1 = ON

0 Set parameter 260=1

2 6 3 3 way valve control 0 = Sanitary

1 = Heating

0 Set parameter 260=1

2 6 4 <Not Available>

2 7 TEST & UTILITIES

2 7 0 Test mode TEST+

= Max Heating power

TEST+ = Max DHW power

TEST+

= Minimum power.

activation can also be obtained

by pressing the Reset button

for 10 seconds. The function is

deactivated after 30 minutes or

by pressing Reset

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ariston E-Combi One Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ariston E-Combi One

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info