Bedienungsanleitung Ariston E-System One (Seite 9 von 12) (Englisch)

719961

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

/ 9

USER’S MANUAL



The boiler is protected from malfunctions by means of internal

checks performed by the electronic P.C.B., which stops the boiler

from operating if necessary. In the event of the boiler being shut

o in this manner, a code appears on the control panel display

which refers to the type of shut-o and the reason behind it.

Two types of shut-o may occur:



This type of error is “volatile”, which means

that the boiler starts up again automatically

as soon as the problem which caused the

shut-o is removed;

and the error

code

(e.g. / ) ash on the

display and the symbol appears.

In fact, soon as the cause of the shut-o

disappears, the boiler starts up again and

continues to operate normally.

If the boiler still indicates a safety shut-o,

switch it o. Make sure the external electric

switch is in the OFF position, shut o the gas valve and contact a

qualied technician.



If the water pressure inside the heating circuit is insucient, the

boiler will perform a safety shut-o.

Code 108 (

/ ) will appear on

the display.

The system may be restarted, re-balancing

the water pressure, by using the lling

procedure - see note 1.

If the re-balancing request is performed

on a frequent basis, switch the boiler o,

bring the external electric switch to the OFF

position, shut o the gas valve and contact

a qualied technician to check for any leaks

of water.

Important

If this shutdown occurs frequently, contact an authorised

service centre for assistance. For safety reasons, the boiler

will allow a maximum of 5 reset operations to take place in 15

minutes (individual presses of the button).

If the shutdown is occasional or an isolated event, this is not

Necessarily a problem.

Anti-frost Device.

The anti-frost function acts on the central heating ow temperature pro-

be, independently from other settings, when the electrical supply is tur-

ned on. If the primary circuit temperature falls below 8°C the pump will

run for 2 minutes.

After the two minutes of circulation (xed) the boiler will check the fol-

lowing:

a - if the central heating ow temperature is > 8°C, the pump stops;

b - if the central heating ow temperature is between 4 and 8°C, the

pump will run for another two minutes;

c - if the central heating ow temperature is

< 4°C, the burner will re (heating posi-

tion) at minimum power until the tempe-

rature reaches 33°C, the burner will go o

and the pump will continue to run for two

minutes.

The activation of the Anti-Frost feature is

symbolised by

The anti-frost device activates only when (with

the boiler operating correctly):

- the system pressure is correct;

- the boiler is electrically powered;

- there is a supply of gas.

Operation shutdown error table

Display Description

1 01 Overheating

1 03

Insucient circulation

1 04

1 05

1 06

1 07

1 08 Insucient water pressure - see Note 1

3 05 P.C.B. error

3 06 P.C.B. error

3 07 P.C.B. error

5 01 No ame detection









PURGE









Operation shutdown

This type of error is “non-volatile”, which means that it is not

removed automatically.

On the display ash

and the error code

e.g.

Err/501

and appears the symbol

In this case the boiler does not restart automatically, but it may be

reset by pressing the

button.

If the problem manifests itself again after several attempts to

reset the appliance, contact a qualied technician.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ariston E-System One Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ariston E-System One

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info