Bedienungsanleitung Ariston EVOS 35 MC4 (Seite 28 von 88) (Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

566565

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

WARNING:

- Before all interventions, make sure that both units have been disconnected from the electricity supply.

- Make sure the systems to which the appliance should be connected comply with the applicable norms in force.

CHECKS WITHOUT THE USE OF TOOLS OR INSTRUMENTS

Operation in Cooling mode - Visual checks on the Internal Unit

Problem Check Intervention

1 - Frost forms on the Internal Unit’s

heat exchanger.

1.A - Frost only on the lower part of the

heat exchanger: gas leak.

1.B - Frost on the whole heat exchanger:

the air ﬁ lter is clogged.

The room temperature is low

(< 20° C).

· Find the leak and recharge.

· Clean the air ﬁ lter.

Unplug the appliance and switch off the

dedicated switch before cleaning. (risk

of electrocution).

· Check the room temp.

2 - No condensation forms. 2.A - If the Internal Unit’s heat exchang-

er remains dry and the electricity

consumption is much lower than

the rated value, then there is a

leak.

· Find the leak.

· Replace the heat exchanger.

3 - The compressor works but there is lit-

tle cooling.

3.A - The External Unit’s heat exchanger

is clogged or covered: the heat ex-

change is poor.

3.B - The ﬁ ns on the External Unit’s heat

exchanger are bent.

· Clear the External Unit’s heat exchang-

er.

· Straighten the ﬁ ns on the external heat

exchanger.

4 - The air temperature is low, but there

is little cooling.

4.A - The Internal Unit ﬁ lter is clogged.

4.B - The air recirculates in the Internal

Unit.

4.C - The appliance is not the right size

or there is an overload (e.g. heat

sources, overcrowding, etc.).

· Clean the ﬁ lter.

· Encourage the free circulation of air.

· Replace the appliance or remove the

overload.

5 - The compressor stays still. 5.A - The compressor is very hot: ther-

mal protection.

· Wait for the temperature to drop.

6 - The appliance comes to a stop after a

few minutes of operation.

6.A - The Internal Unit fan is out of order.

· Replace the motor.

· Only use original spare parts.

TROUBLESHOOTING - electrical part

Problem Check Intervention

1 - The appliance gives no sign of life (no

LEDs lit, no beeps sounded), not even

when you press the ON-OFF button

on the internal unit.

1.A - Check whether there has been a

power failure.

1.B - Check whether the plug is inserted

fully in the socket in the wall.

1.C - Check whether the automatic

switch has blown.

1.D - Check whether the selector has

been set to stop.

· Restore the power supply and the cor-

rect connections.

· Plug the appliance in fully.

· Reset the automatic switch.

· Set the selector to another function.

2 - The remote control does not work or

only works at a close distance.

2.A - Check whether the batteries are

low.

2.B - Check whether there are any ob-

stacles (curtains or ornaments)

between the remote control and the

air conditioning unit.

2.C - Check whether the distance be-

tween the remote control and the

unit is too far.

· Replace the batteries.

· Remove all obstacles.

· Move closer to the air conditioning unit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ariston EVOS 35 MC4 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ariston EVOS 35 MC4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info