Bedienungsanleitung Ariston FD 772 P (Seite 26 von 42) (Englisch, Holländisch, Französisch, Spanisch)

47981

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

Cleaning by Pyrolysis

SAFETY MEASURES

During pyrolysis, the temperature inside the oven

reaches 450° to 500°. These high temperatures are

needed for breaking down the residues inside the oven

(see above).

Your oven is therefore equipped with the following

safety devices:

• The door automatically locks as soon as the tem-

perature reaches a certain level in order to prevent any

risk of injury by burning.

• The power for the heating elements cuts off in case

an anomaly occurs.

Comments

1 - Despite the high interior temperature throughout the

pyrolysis operation, the exterior walls of the oven re-

main only slightly warm, due to:

• Reinforced insulation of the cooking chamber,

• A fan which circulates air to cool the walls.

2 - Looking through the oven window, you might see

particles that flare up during their destruction by pyroly-

sis upon contact with a heating element. This is merely

a phenomenon of combustion. It is perfectly nor-

mal and poses no risk.

PRECAUTIONS TO TAKE BEFORE PYROLYSIS

1 - Be sure to eliminate any large spills with a damp

sponge. We strongly advise against the use of deter-

gents or any other oven cleaning products.

2 - Remove all accessories. They are not designed to

resist the high temperatures of pyrolysis. Furthermore,

some of them might obstruct the circulation of heat on

the oven walls, thus harming the performance of the

operation. The accessories can easily be cleaned like

regular dishes, even in a dishwasher.

3 - Do not leave dish towels on the oven handle.

Important:

During pyrolysis, the surfaces may become hot. Keep

young children away.

How to start pyrolysis:

- Remove all accessories from the oven. Eliminate

large spills, in order to avoid any risk of producing

fumes or flames.

- Close the door.

- Set the Function Selector to

- Set the programme. You can choose between:

• Immediate start: same procedure as for a cooking

operation,

• Delayed start: same procedure as for a cooking

operation.

Pyrolysis usually takes about 75 minutes. It can last as

long as 75 to 100 minutes depending on how dirty the

oven is.

What happens during pyrolysis?

The indicator light comes on when pyrolysis starts:

either immediately, or

at the preset time if you have programmed a delayed

start.

The indicator light is off when pyrolysis starts. It

comes on when the temperature inside the oven

reaches a certain level. It is then impossible to open

the door.

What happens at the end of pyrolysis?

The indicator light goes off and stays off,

The indicator light goes off when the temperature

inside the oven has dropped sufficiently. It is then pos-

sible to open the door, with the Function Selector still on

Some white dust may remain on the bottom and walls of

the oven. Remove it with a damp sponge after the oven

has cooled completely.

If you wish to use the residual heat to start a cooking

operation, do not worry about the dust—it is harmless.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ariston FD 772 P Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info