Bedienungsanleitung Ariston FD 87 Ice (Seite 18 von 66) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

454688

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

To fasten the oven to the

cabinet, open the door of

the oven and fasten it by

inserting the 4 wood screws

into the 4 holes locate on

the perimeter of the frame.

The panels of the adjacent

cabinets must be made of

heat resistant material. In

particular, cabinets with a

veneer exterior must be assembled with glues able to

withstand temperatures of up to 100°C.

In compliance with current safety standards, contact with

the electrical parts of the oven must not be possible once

it has been installed.

All parts which ensure safe operation of the appliance must

not be able to be removed without the use of a tool.

Electrical Connection

Those ovens equipped with a three-pole power supply cord

are designed to operate with alternating current with the

voltage and frequency indicated on the data plate (located

on the appliance) and in the instruction manual. The wire

for grounding the appliance is yellow-green in color.

Mounting a Power Supply Cable

Opening the terminal board:

• Remove the "V" screw;

• Pull to open the cover of the terminal board.

To install the cable, proceed as follows:

• Remove the wire clamp screw and the three contact

screws L-N-

• Fasten the wires beneath the heads of the screws using

the following color scheme : Blue (N) Brown (L) Yellow-

Green

• Fasten the suppy cable in place with the clamp, close the

cover to the terminal box and fasten it with the "V" screw.

Attaching the Power Supply Cable to the Mains

The appliance must connected directly to the mains by

means of an omni-polar switch with a minimum contact

break of 3 mm, sized for the load and in compliance with

the standards currently in effect (the earthing wire must

not be interrupted by the switch).

The power supply cord must be positioned so that it does

not reach a temperature 50°C above ambient temperatu-

re at any one point.

Before making the connection, check that:

• the fuse and the electrical system in the home can

handle the load of the appliance (see the data plate);

• the electrical mains in the home are equipped with an

efficient grounding system in compliance with the safety

standards currently in effect;

• The electrical outlet or omnipolar switch is within easy

reach when the oven is installed.

NB: Do not use adaptors, shunts or reducing devices as

they may cause overheating and lead to fires.

Technical Specifications

Inner Dimensions of the Oven:

Width - 40 cm

Depth - 39 cm

Height- 34 cm

Inner Volume of the Oven:

53 Liters

Energy Consumption:

To reach 200°C: 0.45 kWh

To maintain the temp. at 200°C for 1 hour: 0.95 kWh

Total: 1.40 kWh

Voltage and Frequency of Power Supply:

230V / 50Hz / 2950W

This appliance conforms with the following European

Economic Community directives:

- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent

modifications;

- 89/336/EEC of 03/05/89 (Electromagnetic

Compatibility) and subsequent modifications;

- 93/68/EEC of 22/07/93 and subsequent modifications.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ariston FD 87 Ice Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info