Bedienungsanleitung Ariston FD 96 P (Seite 8 von 14) (Englisch)

47965

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

The programmer

Setting the time

You can only set the time if the mode selector is set to "0".

After the appliance has been connected to the power

supply (or following a power failure), a flashing "0.00" is

displayed. Press keys "+" and/or "-" to set the time.

The time set is memorised, but you still have another 3

seconds to modify it, as all the other buttons remain

disabled for that time.

Setting the timer

The timer only works when the oven is switched off (mode

selector set to 0).

Press key briefly and set the time using keys "+"

and/or "-". As soon as you release the keys, the selected

duration is memorised and can still be modified for 3

seconds, indicator light comes on and the countdown

begins.

When the end of the time set is reached, an acoustic signal

sounds for 1 minute; to turn it off, just press any of the

keys; indicator light comes off.

The timer operation is independent from that of the

oven.

Acoustic signal volume

You can adjust the volume of the acoustic signal by

pressing button "-" (when the signal sounds) until you attain

the required volume.

Cooking without the programmer

When the oven is switched off (mode selector set to 0), all

the keys (except for "-" to adjust the volume of the acoustic

signal) are disabled.

Select a cooking mode by turning the mode selector knob

clockwise. Each function has a predefined cooking time

that you can visualise by pressing . You can modify the

cooking time according to the recipes you use. Simply

press and choose the cooking time you require using

the “-” and/or “+”.

The display indicates a recommended temperature,

which is independent from that indicated on the

temperature selector: you can change it by turning the

temperature selector knob.

The grill display indicates a power level between 1 and 5

(1 for minimum power and 5 for maximum power).

Your oven is now ready to start cooking: press the

key. The oven begins the pre-heating phase, during which

symbol blinks. It stops blinking when pre-heating is done

(after approximately 10 minutes).

If you fail to press the cooking start key one minute after

having selected a mode, the word "OFF" comes up on the

display and the keys are disabled. In this case, set the

mode selector back to "0" and proceed with the various

adjustments.

WARNING

Your appliance is fitted with a diagnosis system which

detects any malfunctions and displays "FnFm" on the

programmer (n and m are numbers).

In this case, please contact your nearest after-sales

service centre for assistance.

Indicator light for a programmed

operation:

- lit : operation underway

- off: operation finished

- flashing: programmed operation

has finished

Letter A:

- off: manual mode

- lit: an operation has been programmed

Display for all functions

clock, timer,

cooking duration and

end-of-cooking/fast-cleaning time

Timer indicator light

Button to set the timer

Buttons + and - to set the clock, timer,

cooking duration and end-of-operation

time, press on:

+ to increase the time

- to reduce the time

Button to start cooking

Button to set the

cooking duration

Button to set the

end-of-cooking time

5 s.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ariston FD 96 P Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ariston FD 96 P

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info