Bedienungsanleitung Ariston HZV 9 (Seite 12 von 44) (Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

454563

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

! It is important to conserve this booklet for

consultation at any moment. In the case of sale,

cession or move, make sure it is together with the

product.

! Read the instructions carefully: there is important

information about installation, use and safety.

! Do not carry out electrical or mechanical variations

on the product or on the discharge conduits.

Installation

Electric connection

! The power tension must correspond with the tension

shown on the characteristics label situated inside the

hood. If provided with a plug, attach the hood to a

socket conforming to the regulations in force and

placed in an accessible zone. If without a plug,

(

connected directly to the power supply

), use a

regulation bipolar switch with a distance of the

contacts on opening not less than 3mm (

accessible

! If necessary, the situating of the supply cable must

be carried out by the technical assistance service or a

qualified person.

An authorized installer must carry out the electrical

connection of the hood.

The company declines any responsibility whenever

these regulations are not respected.

Preliminary information for installation of the hood:

Disconnect the hood during electrical connection, by

turning the home mains switch off.

Expansion wall plugs are provided to secure the hood

to most types of walls/ceilings. However, a qualified

technician must verify suitability of the materials in

accordance with the type of wall/ceiling. The

wall/ceiling must be strong enough to take the weight

of the hood.

Do not tile, grout or silicone this appliance to the wall.

Surface mounting only.

Do not fix chimney flue to furniture or fly over shelves

unless the chimney flue can be easily removed, in

case maintenance is ever required.

Where foreseen remove the grease collecting panels.

Remove the grease filter/s

Do not tile, grout or silicone this appliance to the wall.

Surface mounting only.

Do not fix chimney flue to furniture or fly over shelves

unless the chimney flue can be easily removed, in case

maintenance is ever required.

Assembling the chimney flue support/bracket (3 parts):

The three parts should be fixed with 4 screws, the

support extension is adjustable and should correspond

to the internal width of the telescopic chimney flue.

Assembling the deflector (only when a deflector

composed of 3 parts is supplied – the deflector should

be only for the filter version):

The three parts should be fixed with 2 screws, the

deflector extension is adjustable and should

correspond to the width of the chimney flue support, to

which it is then fixed.

The minimum distance between the supporting surface

for the cooking vessels on the hob and the lowest part

of the range hood must be not less than 50cm from

electric cookers and 65 cm from gas or mixed cookers.

If the instructions for installation for the gas hob specify

a greater distance, this must be adhered to.

1.Draw a line corresponding to the centre line on the

Installation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ariston HZV 9 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info