Bedienungsanleitung Ariston LL65 (Seite 7 von 36) (Englisch)

35353

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ARISTON DISHWASHER - User Manual 5

www.aristonappliances.us

You have loaded your dishes and you now have to set

the wash cycle. It takes just one minute to learn how

Starting the dishwasher

You can cancel the

wash cycle in progress,

if it has only just started.

Make sure the wash

cycle has ended before

removing the dishes!

After performing all the

operations described in the

previous paragraphs press

on-off button "A": indicator

light "B" comes on.

Selecting the wash cycle.

To select the wash cycle

press button "P". Each time

you press the button, a

beep will sound and

indicator lights "E" will light

up in sequence: choose the

cycle you deem most

suited to the type of dishes

to be washed (have a look

at the wash cycle table on

page 7). If the appliance

door is shut, press the Start

button "R" and you will hear

a beep; the cycle will start

up within a few seconds.

The dishwasher keeps you

informed.

Your dishwasher is fitted

with indicator lights (G)

which light up to indicate

the cycle phase under way.

prewash,wash,rinsing,

drying. At all times, your

dishwasher tells you which

cycle phase is under way.

Modifying a wash cycle in

progress.

If you have chosen the

wrong cycle, not to worry!

You can modify the wash

cycle in progress, if it has

only just started.

Keep the RESET button

"R" pressed for about 5

seconds: a prolonged beep

will sound, followed by

three short beeps. Indicator

light "G" will turn off and at

this stage, all the settings

will have been cancelled.

You are now free to re-set

the correct wash cycle.

You've left out a dish?

Well, it happens to

everyone. Interrupt the

wash cycle by pressing the

ON-OFF button, insert the

dish you had forgotten and

press the ON-OFF button

again. The cycle will start

up from where you

interrupted it.

Finished?

The end of the wash cycle

is indicated by two short

beeps and the flashing of

the drying phase indicator

light.

The end of the wash cycle

is indicated by two short

beeps and the flashing of

the drying phase indicator

light.

Turn the appliance off by

pressing button "A", thus

cutting off the electricity

supply.

 If accessible turn off the

water tap

 Wait a few minutes

before unloading the

dishes: they are very hot!

If you wait a little while,

they dry better thanks to

the steam.

Empty the lower rack

first.

There's been a power

failure? Have you opened

the dishwasher door?

The wash cycle stops and

then restarts when the

electricity comes back on

or when you shut the door.

Everything is under

control!

If opening

the door

soon after

the end of

the program, or during

it, stand away from the

Dishwasher, to avoid

possible injury from

hot steam.

You decide when it starts.

When you have loaded the

dishes, you can choose

when to start your

dishwasher before setting

the wash cycle desired.

Press button "D" to delay

the start of the wash cycle

by 12, 9, 6 or 3 hours.

Each time you press it, you

will hear a short beep and

the indicator light "G"

corresponding to the

selected delay will light up.

Now you can select the

desired wash cycle. Press

the start button "R" and

after you hear the beep, the

countdown to the delayed

start will begin.

Once this time is up, the

indicator light will stop

flashing and the wash cycle

will begin.

If you have set a 12 hour

delay, for example, once

you have selected the

wash cycle, the 12 hour

indicator light will flash

followed by the others in

sequence until the set time

delay is up. A quick look at

the indicator lights will keep

you informed of the

countdown progress at all

times.

Have you changed your

mind?

If you change your mind,

you can set a shorter time

delay: press button "D" to

select it. You need not reset

the wash cycle.

If on the other hand you

want to cancel the delay

set and you want the

cycle to start immediately,

press button "D"

repeatedly until the cycle

starts and indicator light

"G" corresponding to the

cycle start phase comes

on.

Dual function of indicator

lights "G"

1) flashing to indicate a

delayed start: to remind

you that you have set a

delayed start;

2) on and not flashing

beneath the cycle phase

symbol:

meaning the cycle has

started and is in the phase

indicated by the symbol.

You want to wash on the

upper rack only?

Remember to use half the

amount of detergent.

Your dishwasher also

allows you to wash half a

load, to save water and

electricity.

Before setting any wash

cycle whatsoever, press

button F to select that

you want to run a half cycle

on the upper rack.

When you press it, you will

hear a beep and indicator

light H corresponding to

the selected function will

come on.

Would you like to see which

settings you have made?

At any time, when the

cycle is under way, if you

press button "P", the cycle

in progress indicator light

will light up for a few

seconds, followed by the

half load indicator light,

wherever set.

Ready, steady, go!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ariston LL65 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info