454524

Ariston LZ 700 DUO Seite 17

17
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
ARISTON DISHWASHER - Instructions for installation and use
15
D
ISHWASHER
First of all.
After performing all the operations
described in the previous
paragraphs, turn the water tap on
completely and press ON-OFF
button "A": you will hear a short
beep and the display lights up,
and the wash cycle time selected
on the knob will flash. Now the
appliance is on and ready to be
programmed.
Selecting the wash
cycle.
Turn knob "M" until the reference
notch on the knob corresponds with
the number or symbol for the cycle
you wish to set (have a look at the
wash cycle table on page 17). Press
the Start button "R" and the wash
cycle starts up, the approximate
amount of time left until the end of
the wash cycle is displayed.
After
a few seconds, you will hear a short
beep: the wash cycle has begun and
indicator "G" displays the symbol
corresponding to the cycle starting
phase.The counter "L" will indica-
te the estimated amount of time
left until the end of the wash cycle.
Do not expect a precise countdown
as the wash cycle starts with an
estimated cycle time that is
updated as the cycle progresses and
according to a number of
parameters that affect the cycle
itself (such as water hardness, the
temperature of the water, the
degree of soil, etc.).
The dishwasher informs
you.
Your dishwasher is provided with
an indicator light (G) with 4
symbols which come on as the
appliance carries out the wash
phase indicated by the indicator
light.
These indicator lights represent the
phases corresponding to:
pre-wash, wash, rinses, drying.
At all times, your dishwasher tells
you where it is at.
Modifying a wash cycle
in progress.
But if you have chosen the wrong
cycle, not to worry! You can modify
the wash cycle in progress only if
it has only just started.
Keep the Reset button "R" pressed
for about 3 seconds:
a prolonged beep will sound,
followed by three short beeps. The
cancelled cycle time will flash on
the display. Turn the knob to select
a new wash cycle.
You've left out a dish?
Well, it happens to everyone.
Interrupt the wash cycle by
pressing the ON-OFF button, insert
the dish you had forgotten and
press the ON-OFF button again.
The cycle will start up from where
you interrupted it.
Finished?
The end of the wash cycle is
indicated by two short beeps and
the word "END" flashes on the
display.
You have loaded your dishes and you now have
to set the wash cycle. It takes just one minute
to learn how
Starting the dishwasher
Make sure the
wash cycle has
ended before
removing the
dishes!
There's been a power
failure? Have you
opened the dishwasher
door?
The wash cycle stops and then
restarts when the electricity comes
back on or when you close the door.
Everything is under control!
You want to wash on
one rack only?
Remember to use half
the amount of detergent.
Your dishwasher also allows you
to wash half a load When you only
have little cutlery to wash, you can
run just half a load on the upper
rack, saving on both water and
electricity.
Press button "N"; you will hear a
beep and the symbol V
corresponding to the half load will
light up.
Once you have made your setting,
start the wash cycle by pressing
the START button.
- This option is available with all
wash cycles.. Press it once more
to reset the rack selection and the
dishwasher will consequently wash
on both racks.
How to set the extra
drying
If you want your dishes to be
perfectly dry, follow the
instructions below.
Press button "H". After a prolonged
beep, indicator light "Z" lights up
and the time corresponding to the
wash cycle selected on the knob
will flash on the display.
To disable the extra drying option,
press the same button and
indicator light "Z" will be turned off
after a beep is sounded.
This option is incompatible with the
soak cycle. Remember that with
extra drying, the wash cycle will
last longer, to provide you with drier
dishes.
You decide when it
starts.
When you have loaded the dishes,
you can choose when to start your
dishwasher before setting the wash
cycle desired.
Press button "I" repeatedly to
postpone the start of the wash
Ready, steady, go!
The delayed start is
also reset
automatically should
you fail to select the
wash cycle within 15
seconds.
cycle from 01 hour to 24h.
If you press the button again, the
word "OFF" is displayed (no
selection made).
Once you have made your
selection, make sure the appliance
door is shut and start the wash
cycle by pressing the START
button.
Symbol "U" lights up on the display
and the countdown begins.
Once the countdown is up, the
wash cycle begins and the
approximate amount of time left
until the end of the wash cycle is
displayed. A quick look at the
indicator lights will keep you
informed of the countdown
progress at all times.
Have you changed your
mind?
If you change your mind, you can
set a shorter time delay: press
button "I" to select it. You need not
reset the wash cycle.
If you have changed your mind and
wish to start the wash cycle
immediately, press button "I" until
the countdown is fully reset.
Indicator light "U" will turn off and
the cycle will start at the sound of
a beep.
The indicator light corresponding
to the cycle phase under way will
come up on the display and the
countdown to the estimated cycle
end begins.
Warning!
Turn the appliance off at the ON-
OFF button , unplug the appli-
ance from the electricity socket
to cut off the power supply; the
power supply cable should con-
sequently be easily accessible.
Turn off the water tap.
Empty the lower rack first.
Make sure the wash cycle has
ended before removing the dishes!
Warning: when you open the
dishwasher door after the wash
cycle has just ended or is under
way, take care not to scald yourself
with the hot steam.
… 17 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ariston LZ 700 DUO wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info