Bedienungsanleitung Ariston MBT1821Z (Seite 20 von 72) (Englisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

23847

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

WATER LEVEL

MAX

WATER LEVEL

MAX

WATER LEVEL

MAX

switches off); the food may now be moved into the

two lower compartments (so that the Cool Care Zone

can be used if necessary) or even left in the Cool

Care Zone compartment, which operates as a normal

storage compartment when the function has not

been activated.

• Do not re-freeze food that is defrosting or that has already

been defrosted. These foods must be cooked and eaten

(within 24 hours).

• Fresh food that needs to be frozen must not come into

contact with food that has already been defrosted.

• Do not place glass bottles which contain liquids, and

which are corked or hermetically sealed in the freezer

because they could break.

• The maximum quantity of food that may be frozen daily is

indicated on the plate containing the technical properties

located on the bottom left side of the refrigerator

compartment (for example: Kg/24h: 4).

! Do not open the door during freezing.

! If there is a power cut or malfunction, do not open the

freezer door. This will help maintain the temperature inside

the freezer, ensuring that foods are conserved for at least

9 -14 hours.

Cool Care Zone

The Cool Care Zone is a special compartment in the

freezer which allows the user to choose between 4

different operating modes that may be set according to

specific requirements and the type of food stored

inside. The temperature settings that may be selected

are -8°C, -12°C and -18°C, indicated by the icons

depicting a strawberry, an ice cream and a bottle on

the control panel. The Cool Care Zone is equipped with

controls that may be operated independently from the

other compartments inside the freezer, by the Cool

Care Zone may also be deactivated using the control

panel, so that it can then be used as a normal freezer

compartment.

ICE CARE tray

The fact that they are situated on the top part of the

freezer drawers ensures greater cleanliness: the ice no

longer comes into contact with the food placed inside

the freezer compartment; furthermore, the dripping of

the water during filling is avoided (a lid to cover up the

hole after filling with water is also provided).

1. Pull out the tray by pushing it up.

Check that the tray is ompletely empty and fill it with

water through the opening provided.

2. Take care not to exceed the level indicated (MAX

WATER LEVEL). Excess water prevents the ice cubes

from dispensing (if this happens, wait for the ice to

melt and empty the tray).

3. Turn the tray 90°: due to the connected

compartments each mould fills with water (

see

diagram

4. Close the opening with the lid provided and put the

tray back, placing the top part in the corresponding

housing and allowing it to drop in again.

5. When the ice has formed (minimum time

approximately 8 hours) knock the tray against a hard

surface and wet the outside so that the ice cubes

come loose and take them out through the opening.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ariston MBT1821Z Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info