Bedienungsanleitung Aritech CS875 (Seite 127 von 167) (Englisch)

557696

127

Zoom out

Zoom in

Vorherige Seite

1/167

Nächste Seite

CS175-275-575-875 Installation Guide 127

21 CS586 RS232 INTERFACE

The CS586 is a low cost add-on module that fits neatly into any CSx75 system enclosure

and provides a standard RS232 bi-directional DB-9 connector for connection to a home

automation host system. A simple three-wire connection to the main control is all that is

required to fully integrate this card into the system.

The CS586 can be used on a CS175 control panel to provide an RS232 up/download

functionality. It is built into the CS575 and CS875 control panels.

The CS586 has several levels of security that can be programmed at the time of

installation to allow as much or as little security system information to be passed to the

host system. It can also be set to limit the commands that are accepted from the host

system to prevent unauthorized attempts to override the security system status.

The unit can be easily configured for communication in an ASCII or binary protocol. A

selectable baud rate can be set from 600 baud to 76.8k baud with hardware RTS and

CTS handshaking. The ASCII implementation is easy to use and debug with standard

programming tools. The binary version is a more efficient method for transferring

information between the two systems. The system integrator can select any number of

events or conditions to cause the CS586 to send the relevant information to the host

without polling. This allows for a faster response to activity than polling alone can provide.

All security system information can be requested anytime if enabled to do so by the

installer. This is useful at system initialization and at periodic intervals to keep the two

systems in sync without worrying about missing any transitional event. This information is

organized as system, partition, zones and outputs. System information contains

information such as power status, phone line condition, module troubles and other system

wide conditions. Partition information includes readiness of all zones assigned, armed

state, entry/exit delays, last user number, alarm condition and many other conditions

within a specific partition. Zone information includes faults, alarm memory, bypasses,

troubles, tampers, low batteries, missing and partition assignments. Output messages

include commands that can be passed to, or from, devices in X-10 compatible format.

21.1 Wiring the CS586

The CS586 is a module which can be plugged in directly to the CS175.

21.1.1 Terminal description

Terminal Description

POS

Connect to the POSITIVE keypad terminal of CSx75 control panel.

COM

Connect to the COM keypad terminal of the CSx75 control panel.

DATA

Connect to the DATA keypad terminal of the CSx75 control panel.

Terminal Description

DB 9 Pin-out Signal

Signal Name CS175 ------ PC Jumper

number

Pin number

A position

Pin number

B position

CTS*

- > J7 8** 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aritech CS875 Seite 127

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Aritech CS875

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info