702726
7
Zoom out
Zoom in
Vorherige Seite
1/12
Nächste Seite
Installation
? Copyright 1996 WARNING-Opto-Elektronik GmbH & Co Produktions KG
changes reserved
6
3.1.1 Wiring diagram
distributor
Transmitter
to central
control unit
Receiver
Connection for
earth potential
Screen on both
sides could be
connected with „-„
Screen to be
connected with
earth potential
1.
2.
3.
survey of wiring diagram
Transmitter/Receiver
+ - .
distributor
To central
control unit
to
receiver
to transmitter
screen
connection to supply voltage and
screening
The following items are recommended for the wiring:
1. Connect screen of the supply line leading to the distributor with earth potential.
2. The screen of the supply lines must be connected from the distributor to the devices from
both sides with minus potential. Never connect the screen with earth potential.
3. The housings are to be connected with earth potential.
4. No signals are allowed to be transmitted over the screens.
When inductive load is required at the output an additional protecting circuit must be provided i.e. RC-
component or diode.
3.2 Installation of the equipment
The devices are to be installed on a solid foundation in vertical order. The swivelling optic reduces the
necessity of putting the devices on a common optical axis. For to open the single units untie the screws
at the housing ends and remove the cover carefully. When closing the devices put on the cover carefully
and fasten screws carefully again.
3.3 Mounting with pillars
3.3.1 Ground-plate
Weather influences could effect movements of the ground-plate. Therefore they have to be fixed on a
stable and solid mounting surface. Thus, the ground-plate needs stationary connection. Please pay
attention to the position of the cable inlet to the ground-plate.
Concrete anchor
B25
Ground-plate
800
350
Concrete
anhor
(800)
600
600
(800)
Column´s height Fundament surface
up to 2m (600 x 600) mm
up to 2m (800 x 800) mm
minimum size of the concrete fundament
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Aritech DO510 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info