Bedienungsanleitung Aritech TD8812 (Seite 12 von 32) (Englisch)

557782

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

- 12 -

3.1.2 Dual / Alternate reporting

You may program “dual” or “alternate” reporting of messages to the central station.

• DUAL: Dual means that alarms are reported to ALL central station numbers programmed for that particular

type of alarm.

• ALTERNATE: Alternate means that the alarms are reported to ONLY ONE of the central station numbers

programmed for that particular type of alarm.

• EXAMPLE: Panic alarm is programmed to report to central stations 1, 2 and 4. With the “Dual” option all panic

alarms are reported to ALL these Central Station numbers. With the “Alternate” option the dialler will call

each of the numbers in turn: first number 1, then number 2, then number 4, then number 1 again, etc.. The

Dialler will close down on receipt of the first "Call Successful" Kiss-off.

3.1.3 Central station 1 attempts

Number of attempts to dial telephone number 1 before the dialler attempts to call the next number.

3.1.4 PABX no.

Where the dialler has to operate via an internal (PABX) switchboard, it may be necessary to dial a prefix

number before an outside line can be obtained. The dialler can be programmed to dial a prefix of up to SIX

digits. The PABX number can also be used to supplement telephone numbers with 16 digits. The first digit of

the PABX number must be set for wait for dialling tone [t]. The [WAIT FOR DIALLING TONE] option must be

set to [NO] in the dial options menu. In this way the telephone number can be extended to 21digits.

3.1.5 Previous menu

This menu option returns you to the first column of the menu structure.

3.2 Dialling options

This part of the program relates to the dialling formats available and the types of dialling tones on the

telephone lines.

3.2.1 Pulse / Tone dialling

Pulse (dial) or DTMF (touch tone) dialling must be selected in accordance with the parameters of the

telephone line to be used.

Remark for TD8803/TD8403.

Although this equipment can use either loop disconnect or DTMF signalling, only the performance of the

DTMF signalling is subject to regulatory requirements for correct operation. It is therefore strongly

recommended that the equipment is set to use DTMF signalling for access to public or private emergency

services. DTMF signalling also provides faster call set up.

3.2.2 Wait for dialling tone Yes / No

The dialler can be programmed not to dial until it receives the correct dialling tone. Conversely, you can opt

to have the dialler dial after 5 seconds, even if no correct dialling tone has been received.

3.2.3 Call interval ss

The time interval between individual dialling attempts can be set to 5 or 60 seconds.

3.2.4 Retry period mm

If the dialler has been unable to send a message after the programmed number of dialling attempts, it

hangs up and starts again after the set

retry period

. This period can be set to between 0 and 90 minutes.

* Program [0] if the dialler must stop after the number of programmed '

dialling attemps

' or after

a new activation. Maximum 100 attempts are possible per activation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aritech TD8812 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info