Bedienungsanleitung AS Motor AS 53 2T ES 4WD (Seite 27 von 36) (Englisch)

736661

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Storage

Storing the device

Keep the device in a closed, dry, and well vent-

ilated room and out of reach of children. Al-

ways eliminate all problems of the device be-

fore you store it so that the device is always in

a safe-to-operate state. Let the engine cool

down before you store the device in closed

rooms.

Longer storage

1. Observe the safety instructions for hand-

ling the fuel.

2. Emptying fuel tank. Place a piece of hose

onto the fuel valve and let the fule run into

an approved fuel container.

3. Emtyping carburetor: Start the engine and

let it run until it stops by itself.

4. Thoroughly clean the device.

5. Touch up any possible damage to the

paint finish (for paint, see Accessories).

Before longer storage, e.g. in the fall, have an

authorised service centre check the device!

Restarting

If you want to start the device after a longer

storage, carry out the tasks described in

chapter Maintenance.

Spare parts

The reliable and safe operation of the device

also depends on the quality of the spare parts

used.Only use original spare parts and ac-

cessories approved by “AS-Motor Ger-

many.”When foreign parts are installed, the

warranty and guarantee shall be void for the

foreign parts, the device, and for any resulting

damage.

Inform your authorized service center about

the device type and serial number of your

device when you order spare parts.

Via www.as-motor.com you have direct access

to our spare parts portal. Here you can quickly

find the right spare part using the search func-

tion and print out the corresponding spare

parts list. This makes it easier for you to place

the subsequent order via your authorised spe-

cialist workshop, stating the device type and

the serial number of your device.

Wear parts

Some parts are wear parts. They wear during

use and must be replaced. The warranty does

not cover the following parts:

Blades, cutting blades, cutter bars, blade bolts,

sliding plates, V-belt, chains, Bowden cables,

starter ropes, pressure plates, air filters, spark

plugs, disc springs, lock washers, fuses, discs,

thrust plates, pressure discs, protection skirts,

impact protection, wheels, tires.

Disposal

Grass clippings must not be thrown into the

waste but should be composted.

Shredded plant material decomposes quickly,

can be utilized as fertilizer, and, therefore, be

left on the ground.

Dispose of waste oil and fuel in accordance

with the local regulations or return it to an oil

shop.

Packaging, device, and accessories are made

of recyclable materials and must be disposed

of accordingly.

Warranty

Please see our AS-Motor website for warranty

information.

Please print out the documents that you re-

ceive during the online registration. Keep them

together with your sales receipt.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AS Motor AS 53 2T ES 4WD Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von AS Motor AS 53 2T ES 4WD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info