AS 625 KM / AS 585 KM
1.1 Introduction
Dear customer,
Congratulations to your purchasing decision. With your AS brush cutter, you have received a reliable, high-quality machine that has
proven itself during years of operation. We always strive to further improve our machines. Wherever you want to cut any tall grass, weeds
and scrub, either on meadows, in orchards, on horse pastures or community grounds, you may count on the reliable assistance of your new
brush cutter. The AS shrub cutter is a specialist in such tasks. It cuts large fields with dense and tall grass in the shortest time, handling
uneven surfaces as easily as slopes and embankments.
To be able to work with your brush cutter safely, get familiar with its control, please. For this we have developed these operating
instructions for you. Definitely read the safety instructions in the next chapter! They are to protect your health. In the next chapters, you
will learn everything critical about your AS brush cutter, including its use and care. Your AS brush cutter will only perform best and work for
many years if you treat it properly and follow the few maintenance and care instructions. If you have any questions about your brush cutter,
contact your dealer or directly AS-Motor, please. We are happy to help you, and we are also grateful for suggestions for improvement.
One more wish: Be nice to your neighbours and cut grass only on weekdays between 07:00 a.m. and 01:00 p.m. and between 03:00
and 07:00 p.m. According to the noise protection regulations of 1 August, 1987, it is not allowed to cut grass on Sundays, holidays and
outside of the specified times. Different regional regulations may apply as well (siesta). We now wish you a pleasant work with your AS
brush cutter.
These operating instructions define the right, left, front, and rear sides from the operator's location and view. The operator stands in the
machine’s travel direction, behind the brush cutter handlebars.
1.1.1 Special Warning
The user these Operating Instructions and follow all the machine operating instructions in order to prevent any health risks
or property damage to the user or other persons.
The safety instructions specified in these operating instructions do not cover all the possible conditions and situations, which may occur
in practice. Safety factors, such as a reasonable approach, care, and caution are not included in these operating instructions, but it is
assumed that every person using the machine or doing any maintenance work on it is able to sufficiently use them.
Only mentally and physically fit persons may operate this machine. Should this machine be used commercially, the owner of the
machine is bound to provide operators with work safety training and instruct them regarding its operation, and keep records of such
training.
If you find any part of these operating instructions unclear, feel free to contact
(
or directly the
)
'
The operating instructions attached to this machine are its integral part. They must be available at all times, stored at an accessible
place where they cannot get destroyed. When selling the machine to another person, the operating instructions must be handed over to the
new owner. The manufacturer bears no responsibility for the risks, hazards, accidents, or injuries resulting from operation of the machine if
the above-mentioned conditions have not been met.
The manufacturer bears no responsibility for the damage caused by unauthorized use, inappropriate operation, and any damage caused
by any modification of the machine without the manufacturer’s approval.
During work it is necessary to follow safety regulations to avoid any injury to yourself or other persons present nearby and to avoid any
property damage. These instructions are marked in the operating instructions by the following warning symbol:
&
$
'
#*+
$'
Table 1: Symbols
&$
1.2 Operational Safety
The machine is designed to protect the operator as much as possible against any flying pieces of mowed growth. Do not remove any
passive or active security features. You would expose yourself to the risk of injury.
1.2.1 Safety Regulations
The machine operator must be over ,. - to familiarize himself with the instructions for the use of the machine
and to be familiar with the general principles of occupational safety.
Always make sure that no part (especially the working mechanism or its cover) is damaged or loose .
Identified must be . Use only original spare parts during repairs.
(
Fill-in the dealer’s address in the table provided at the beginning of these operating instructions (unless already filled-in by the dealer).
)
For the address of the manufacturer, see the end of these operating instructions
5
