Bedienungsanleitung AS Motor AS 63 4T B S (Seite 38 von 48) (Englisch)

736670

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Storage

Beware: Do not store or transport the device in

cleaning position.

Fuel and oil can leak and soil or damage the

device and the ground.

Storing the device

Keep the device in a closed, dry, and well vent-

ilated room and out of reach of children. Al-

ways eliminate all problems of the device be-

fore you store it so that the device is always in

a safe-to-operate state. Let the engine cool

down before you store the device in closed

rooms.

Also observe the notices on storage in the at-

tached operating instructions by the engine

manufacturer.

Longer storage

1. Observe the safety instructions for hand-

ling the fuel.

2. Emptying fuel tank. Place a piece of hose

onto the fuel valve and let the fule run into

an approved fuel container.

3. Emtyping carburetor: Start the engine and

let it run until it stops by itself.

4. Thoroughly clean the device.

5. Touch up any possible damage to the

paint finish (for paint, see Accessories).

Before longer storage, e.g. in the fall, have an

authorised service centre check the device!

Also observe the notices on storage in the at-

tached operating instructions by the engine

manufacturer.

Restarting

If you want to start the device after a longer

storage, carry out the tasks described in

chapter Maintenance.

Spare parts

The reliable and safe operation of the device

also depends on the quality of the spare parts

used. Only use original spare parts and ac-

cessories that were approved by

“AS-Motor Germany”. When foreign parts are

installed, the warranty and guarantee shall be

void for the foreign part and for the device and

for any resulting damage.

Inform your authorised service centre about

the device type and serial number of your

devices when you order spare parts.

Wear parts

Some parts are wear parts. They wear during

use and must be replaced. The warranty does

not cover the following parts:

Blades, cutting blades, cutter bars, blade bolts,

sliding plates, V-belt, chains, Bowden cables,

starter ropes, pressure plates, air filters, spark

plugs, disc springs, lock washers, fuses, discs,

thrust plates, pressure discs, protection skirts,

impact protection, wheels, tires.

Disposal

The device cuts and shreds the plant material

in a single operation. Shredded plant material

decomposes quickly, can be utilized as fertil-

izer, and, therefore, be left on the ground.

Dispose of waste oil and fuel in accordance

with the local regulations or return it to an oil

shop.

Packaging, device, and accessories are made

of recyclable materials and must be disposed

of accordingly.

Warranty

Please see our AS-Motor website for warranty

information.

Please print out the documents that you re-

ceive during the online registration. Keep them

together with your sales receipt.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AS Motor AS 63 4T B S Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von AS Motor AS 63 4T B S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info