Bedienungsanleitung AS Motor AS 980 Enduro (Seite 40 von 52) (Englisch)

736689

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Storage

Storing the device

Keep the device in a closed, dry, and well vent-

ilated room and out of reach of children. Al-

ways eliminate all problems of the device be-

fore you store it so that the device is always in

a safe-to-operate state. Let the engine cool

down before you store the device in closed

rooms.

Also observe the notices on storage in the at-

tached operating instructions by the engine

manufacturer.

Longer storage

1. Observe the safety instructions regarding

the handling of fuel.

2. Draining fuel tank: Put a piece of a tube

on the fuel valve and fill the fuel in an ad-

equate fuel container.

3. Emptying carburetor: Start the engine and

let it run until it stops on its own.

4. Clean the device thoroughly.

5. Touch up defects in painting (for spray

paint, see Accessories).

6. Preserve the engine:

– Unscrew the two spark plugs.

– Fill a tablespoon of engine oil into

each spark plug opening.

– Briefly actuate the starter (oil is distrib-

uted in the cylinder).

– Screw the spark plugs back in.

– Do not put the spark plug connector

on!

7. Remove the ignition key and keep it sep-

arate from the device.

In autumn, have your device checked by an

authorised service centre!

Also observe the notices on storage in the at-

tached operating instructions by the engine

manufacturer.

Restarting

If you want to start the device after a longer

storage, carry out the tasks described in

chapter Maintenance.

Spare parts

The reliable and safe operation of the device

also depends on the quality of the spare parts

used. Only use original spare parts and ac-

cessories that were approved by

“AS-Motor Germany”. When foreign parts are

installed, the warranty and guarantee shall be

void for the foreign part and for the device and

for any resulting damage.

Inform your authorised service centre about

the device type and serial number of your

devices when you order spare parts.

Wear parts

Some parts are wear parts. They wear during

use and must be replaced. The warranty does

not cover the following parts:

Blades, cutting blades, cutter bars, blade bolts,

sliding plates, V-belt, chains, Bowden cables,

starter ropes, pressure plates, air filters, spark

plugs, disc springs, lock washers, fuses, discs,

thrust plates, pressure discs, protection skirts,

impact protection, wheels, tires.

Disposal

The device cuts and shreds the plant material

in a single operation. Shredded plant material

decomposes quickly, can be utilized as fertil-

izer, and, therefore, be left on the ground.

Dispose of waste oil and fuel in accordance

with the local regulations or return it to an oil

shop.

Packaging, device, and accessories are made

of recyclable materials and must be disposed

of accordingly.

Warranty

Please see our AS-Motor website for warranty

information.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AS Motor AS 980 Enduro Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von AS Motor AS 980 Enduro

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info