517476
1
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
Helpline No. UK/Northern Ireland 00800 52323000 Rep. Ireland 00800 52323000
Web Support: service@produktservice.info
Model Number: AE1-FW-10SN page 1
Radio Controlled LCD Wall Clock
AE1-FW-10SN
Operating instructions
Issue: July 2011
Table of Contents
1 Area of application.........................................................................1
2 Safety and maintenance.................................................................1
2.1 Safety instructions .................................................................1
2.2 Operating environment conditions.........................................1
2.3 Ambient temperature .............................................................1
2.4 Battery operation ...................................................................1
2.5 Disposal.................................................................................1
2.6 Cleaning and care ..................................................................1
2.7 Storage...................................................................................1
2.8 Information concerning these operating instructions.............1
2.9 Scope of delivery...................................................................1
3 Commissioning ...............................................................................1
4 Modes/functions .............................................................................1
4.1 Function buttons ....................................................................2
4.2 Time and date ........................................................................2
4.2.1 Radio controlled time..................................................2
4.2.2 Manual setting ............................................................2
4.2.3 12/24-hour format .......................................................2
4.2.4 Weekday display..........................................................2
4.2.5 Calendar week ............................................................2
4.2.6 Time zone ....................................................................2
4.3 Alarm time.............................................................................2
4.3.1 Setting the alarm .........................................................2
4.3.2 Activating/deactivating the alarm and alarm repeat
function .......................................................................2
4.3.3 Displaying the alarm time...........................................2
4.3.4 Switching off the alarm ...............................................2
4.4 Temperature display ..............................................................2
4.5 Moon phase ...........................................................................2
4.6 Technical specifications.........................................................2
5 Assembly .........................................................................................2
6 Changing the batteries...................................................................2
7 Declaration of conformity..............................................................2
8 Troubleshooting .............................................................................2
AFTER SALES SUPPORT
Now you have purchased an Ascot product rest assured in the knowledge
that as well as your 3 year parts and labour warranty you have the added
peace of mind of dedicated helplines and web support.
What your 3 Year Warranty means:
Great care has gone into the manufacture of this product and it should
therefore provide you with years of good service when used properly. In the
event of product failure within its intended use over the course of the first
3 years after date of purchase, we will remedy the problem as quickly as
possible once it has been brought to our attention. In the unlikely event of
such an occurrence, or if you require any information about the product,
please contact us via our helpline support services, details of which are to be
found both in this manual and on the product itself.
1 Area of application
This radio controlled wall clock is designed exclusively for use as a clock. It
is intended for private use and is not suitable for commercial purposes. Any
use other than that described in these operating instructions is not permitted
and can result in damage and injury. No liability will be accepted for claims
arising from improper use. Additional information and explanations can be
found in these operating instructions.
2 Safety and maintenance
2.1 Safety instructions
Please pay particular attention to this section and follow all of the
instructions provided. Doing so will ensure reliable operation. Keep the
packaging and operating instructions in a safe place so that they can be
transferred to the new owner if you decide to sell your radio controlled wall
clock. Never open the housing of the wall clock as there are no serviceable
parts inside (the exception to this is opening the battery compartment to
change the batteries, see section 6 "Changing the batteries"). Do not place
any items on top of the clock and do not exert any pressure on the display.
To prevent damage do not touch the display with any sharp objects.
2.2 Operating environment conditions
Make sure your clock is not exposed to continuous moisture and avoid dust,
heat and prolonged exposure to direct sunlight (particularly in a car). The
clock is protected against impact which can occur during normal, everyday
use. It is imperative that very strong magnetic fields (caused by e.g. electric
welding machines, transformers, etc.) are avoided as they may result in
deviations in time measurement. Electromagnetic or atmospheric
interference can also interfere with the radio signal.
2.3 Ambient temperature
Your clock can be operated continuously within an ambient temperature
range of 0° C to 50° C. It should only be exposed to temperatures ranging
from -10° C to 0° C for brief periods. If the batteries have been removed
(see section 6 "Changing the batteries"), you can store the clock at
temperatures ranging between -10° C and 50° C. The clock should be stored
safely. Avoid high temperatures and permanently damp environments.
2.4 Battery operation
Your radio controlled wall clock is operated by 2 x LR6/R6 / AA 1.5V
batteries.
The following section provides you with information about using batteries:
Never expose the batteries to excessive heat from direct sunlight, fire or
other such source as this increases the risk of leakage! Never recharge the
batteries. Do not disassemble or short-circuit the batteries - risk of
explosion! Keep batteries and the clock out of the reach of children.
Batteries can be swallowed by children. If this occurs, seek medical advice
immediately. Prevent leaking batteries from coming into contact with your
skin, eyes and mucous membranes. In the event of contact with battery fluid
rinse the affected areas immediately with plenty of water and seek medical
advice. Always replace all of the batteries at the same time. Ignoring this
information may result in damage and possibly even to the batteries
exploding. You can find information on replacing the batteries under section
6 "Changing the batteries".
2.5 Disposal
Batteries: Batteries are hazardous waste. Batteries can be
disposed of correctly by shops selling batteries and at local
authority waste departments where there are appropriate
containers.
Radio controlled wall clock:
If you wish to dispose of your radio
controlled wall clock, please adhere to the current regulations. Your local
authority waste department can provide you with the relevant information.
07/2011
KRIPPL-WATCHES Warenhandels GmbH
Maria-Theresia-Straße 41, 4600 Wels, Austria
Packaging: Dispose of the clock's packaging according to the current
regulations. Your local authority waste department can provide you with the
relevant information.
2.6 Cleaning and care
Only clean the clock using a soft, damp, lint-free cloth. Do not use any
solvents or abrasive or gaseous cleaning agents. Make sure drops of water
are not left to accumulate on the display. Water can cause long-term
discolouration. Do not expose the display to glaring sunlight or ultra-violet
radiation.
Note! There are no components inside the clock's housing which require
maintenance or cleaning.
2.7 Storage
Remove the batteries if you do not intend using the radio controlled wall
clock for a prolonged period. When storing the clock please observe the
information included under section 2.2 "Operating environment conditions"
and section 2.3 "Ambient temperature".
2.8 Information concerning these operating
instructions
We have arranged these operating instructions in such a way that you can
locate the relevant information by using the Table of Contents. Additional
assistance for your clock can be obtained by browsing our FAQs (frequently
asked questions), which can be accessed online via our product service page
(http://www.produktservice.info) EAN Code: 25072518
2.9 Scope of delivery
1 x radio controlled wall clock AE1-FW-10SN, 1 x set of operating
instructions, 1 x warranty card, 1 x warranty sticker, 2 x LR6/R6 / AA 1.5V
batteries, 2 x feet
3 Commissioning
We recommend that you read the operating instructions thoroughly before
starting to use your radio controlled wall clock. Please pay particular
attention to section 4.1 "Function buttons" in order to become acquainted
with the clock.
1. The batteries have already been inserted into the battery compartment,
however the contacts are interrupted by a battery isolation strip. This
protrudes visibly between the battery compartment and the cover. You
can remove this strip without opening the battery compartment.
2. When you have removed the strip the LCD display will
illuminate, a brief audible tone will sound and the clock's
search procedure will start automatically, which is indicated
by flashing radio waves above the radio tower symbol.
Note! No other settings can be implemented during this period.
This process can take approx. 2 to 5 minutes. When the radio signal is
received the date, time and moon phase displays are set automatically. The
radio waves above the radio tower symbol are illuminated continuously.
As is the case with wireless signals for mobile telephones or radio/TV
reception, it is possible that your radio controlled wall clock will not always
receive a signal at every location. Here are some tips to ensure your clock
operates properly. The following factors can cause malfunctions:
Concrete buildings, metal components and electronic equipment.
Electronic devices such as TVs, computers, various household
appliances, transformers, power lines, radio transmitters or electrified
railway lines.
Atmospheric effects can also interfere with radio waves.
The distance of the radio signal and the geographic environment
(mountains, etc.). So-called "dead spots", which make reception
impossible, can occur anywhere.
Reception is better in rural areas in comparison to large cities. There
are fewer sources of interference at night compared to during the day.
Therefore reception is better at night.
Weak batteries in the clock will impair the quality of reception.
3. The radio signal is generally synchronised with the radio controlled
time within 2 to 5 minutes, after which the radio tower symbol appears
constantly in the display. If this does not occur, press and hold the
"+/ " button for approx. 3 seconds. The radio waves above the radio
tower symbol start to flash and another attempt is made to locate a
radio signal.
4. If it is not possible to receive a signal at your current location, you can
also set the time manually (see section 4.2.2 "Manual setting").
4 Modes/functions
Clock (hours, minutes, seconds), 12/24-hour display
Date (month, day), calendar week display
Weekday in 6 different languages (German, English, Dutch, French,
Spanish and Italian)
Temperature display (in ºC / ºF)
Alarm (weekday alarm, weekend alarm, appointment alarm)
Alarm repeat function
Automatic time adjustment and conversion from summer/winter time
Time zone setting
Moon phase
Suitable for table assembly and wall mounting
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ascot AE1-FW-10SN wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info