592660
31
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
26
TROUBLESHOOTING GUIDE
For Watch Functions in General
For Heart Rate Measurement
Refer to
−−
P. 6
−−
P. 23
P. 24
P. 24
P. 8
P. 8
−−
Remedy
Request the retailer from whom
the watch was purchased to
replace the battery with a new
one immediately.
The accuracy will be recovered
when the watch returns to the
normal temperature. Set the
correct time before use.
Consult the retailer from whom
the watch was purchased.
Set the number of repetitions
as desired in the Timer Setting
Display.
Activate the Alarm Setting
Display to check if the time
zone is set correctly.
Select the alarm channel for
which you set the alarm in the
ALARM Mode, and engage the
alarm.
Check the battery life indicator.
If it indicates that the battery
nears its end, request the retailer
from whom the watch was
purchased to replace the battery
with a new one immediately.
Check the battery life indicator.
If it indicates that the battery
nears its end, request the retailer
from whom the watch was
purchased to replace the battery
with a new one immediately.
The parts replacement is made
at cost. If you wish to have an old
part replaced with a new one,
request the retailer from whom
the watch was purchased.
Possible Cause
T
he battery has run down.
The watch was left in a cold or
hot place.
Water got inside the watch due
to deterioration of the gasket
or other reasons.
The number of repetitions is
set to “1” in the Timer Setting
Display.
A wrong time zone was
selected in the Alarm Setting
Display.
The alarm is not engaged for
the alarm channel for which
the alarm time is set.
The battery may near its end.
The battery may near its end.
The brightness of the LCD
display may decrease after 7
years of use.
The brightness of the backlight
decreases gradually with use.
Problem
The display has become
blank.
The watch gains or loses
time temporarily.
The blur on the glass
persists.
The timer does not repeat
countdown.
The alarm will not ring
at the designated time.
The warning and time-up
beeps will not sound.
The backlight will not
light up.
The LCD display has
become dim and difcult
to read.
The backlight has become
dim.
Refer to
−−
P. 17
P. 14
P. 13
−−
P. 14
P. 13
−−
−−
Remedy
Request the retailer from whom
the watch was purchased to
replace the battery with a new
one immediately.
T
urn ON the Auto-HRM
function in the Function Setting
Display of the HR-CHR Mode.
C
heck that there is no electronic
device that emits radio wave
near you, such as television and
mobile phone.
Adjust the length of the chest
strap, and wear it properly as
instructed in this manual.
Consult a doctor.
Move away from the possible
source of radio wave emission.
Warm yourself up until you feel
warm. If the weather is dry,
moisten the electrode portions
of the chest strap.
Check your pulse rate. As a
precaution, undergo a diagnosis
by a doctor.
HR-GRAPH displays only the
latest log data graphically.
Each time a new measurement
is made to store new data, the
graph is updated automatically.
Possible Cause
The battery for the sensor unit
of the chest strap has run down.
The Auto-HRM function is
turned OFF.
Noise emitted from an adjacent
device is interfering with the
measurement.
The chest strap is not attached
to your chest securely.
An irregular heartbeat was
detected.
When strong radio waves are
detected, abnormal heart rate
may be displayed. Such strong
radio waves are emitted from
high-voltage cable, signal,
engines of train, bus and
automobile, cycle computer,
motor-driven exercise machine,
mobile phone, and so on.
The electrode portions of the
chest strap are cold and dry.
You have not warmed yourself
up sufciently.
You may have an irregular
heartbeat.
You made a new chronograph
measurement, and new log
data was stored in memory.
Problem
The heart rate data is
not displayed though
you are wearing the
chest strap.
The heart rate data is
displayed, but the solid
heart shape does not
appear.
Abnormal heart rate is
displayed.
The graph previously
shown in the HR-GRAPH
Mode was deleted.
AH01-WJ30WJ31_英語版.ai 1 2013/03/01 10:58:10
31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

asics-ah01-wj30

Suche zurücksetzen

  • ich brauche eine deutsche übersetzung der anleitung von asics ah01 Eingereicht am 12-7-2017 16:04

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Asics AH01-WJ30 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info