307941
20
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
Clock
Set the clock to 12h, 24h or to display the remaining program time.
1. Press the arrow buttons up or down until Clock appears in the middle of the display.
2. Press the program selector again (the big arrow) to access the options menu on the right of
the display.
3. Press the up or down arrow buttons to choose the 12h or 24h time format or display the
remaining program time.
4. Press the program selector (the big arrow) to save your setting.
5. If you selected 12 or 24 hour, you will now come automatically to the clock-setting menu.
Setting the clock
6. Press the up arrow button until the correct hour figure is shown.
7. Press the program selector (the big arrow) to save your setting.
8. Press the up arrow button until the correct minute figure is shown.
9. Press the program selector (the big arrow) to save your setting.
10. If you do not want to select any more settings, press the arrow button down until you reach
the program you want.
Audible Volume
You can choose to have the machine notify you when a program is finished or when a fault has
occurred.
1. Press the arrow buttons up or down until Audible Volume appears in the middle of the display.
2. Press the program selector again (the big arrow) to access the options menu on the right of
the display.
3. Press the up or down arrow buttons and choose the Audible Volume setting. Off, Low, Normal,
High.
4. Press the program selector to save your setting.
5. If you do not want to select any more settings, press the arrow button down until you reach
the program you want.
Child-safe Start
You can activate the Child-safe Start option to prevent children from starting the machine. You
can deactivate the Child-safe Start option by pressing the Start/Stop button and Door opening
(key symbol) button at the same time. The Child-safe Start option will be temporarily deactivated
for three minutes.
1. Press the up or down arrow buttons until Child-safe Start appears in the middle of the display.
2. Press the program selector again (the big arrow) to access the options menu on the right of
the display.
3. Press the up or down arrow buttons to select Off or On.
4. Press the program selector to save your setting.
5. If you do not want to select any more settings, press the arrow button down until you reach
the program you want.
20
Settings
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Asko w 6903 fi wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info