628507
41
Zoom out
Zoom in
Vorherige Seite
1/112
Nächste Seite
O
PERATING
THE
EF1210
ASPI Digital -
The Sound of DSP
Technical Support: 404.892.3200 39
U
SING
THE
EF1210 W
ITH
RS-232 C
ONTROL
You can control all of the EF1210’s features with an RS-232 remote control device.
The instructions below explain which RS-232 commands are needed to accomplish
each function. Users may not need to know these commands, since they may be hid-
den behind the user interface of the remote control device. A full Command Set Ref-
erence is provided at the end of this manual starting on page 53.
Serial Port Setup
For RS-232 control, use an RS-232 cable — do not use a null modem. Refer to “Con-
nector Pinouts” on page 88 for pin connections for the RS-232 cable. The RS-232
port on the remote control device should be set to 9600, 8-N-1.
Changing Level
Display on
I
NPUT
and
R
EMOTE
LED Meters
When the EF1210 is in normal operating mode, the input channel level displayed on
the I
NPUT
LED meter can be checked and adjusted using the following commands
from the RS-232 command set:
When the EF1210 is in normal operating mode, the Reference Input level displayed
on the R
EMOTE
LED meter can be checked and adjusted using the following com-
mands from the RS-232 command set::
Command Description Effects
SELECTI
n
Set front panel
I
NPUT
LED meter to
display input chan-
nel n.
The level of input channel n will be
displayed on the I
NPUT
LED meter
and the green LED of the channel will
light.
SELECTI? Request current
assignment of front
panel I
NPUT
LED
meter.
The EF1210 returns channel n, which
indicates that the front panel I
NPUT
LED meter is currently set to display
input channel n.
n ranges from 1 to 8.
Command Description Effects
SELECTR
c
Set front panel
R
EMOTE
LED meter
to display Reference
input c.
The level of Reference input c will be
displayed on the R
EMOTE
LED meter
and the yellow LED of the reference
will light.
SELECTR? Request current
assignment of front
panel R
EMOTE
LED
meter.
The EF1210 returns Reference input c
which indicates that the front panel
R
EMOTE
LED meter is currently set to
display Reference input c.
c is either A or B.
41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Aspi EF1210 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Aspi EF1210

Aspi EF1210 Zusatzinformation - Englisch - 3 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info