628507
78
Zoom out
Zoom in
Vorherige Seite
1/112
Nächste Seite
EF1210 U
SER
M
ANUAL
76 http://www.aspi.com Copyright © 1999, All Rights Reserved
RESTNV
M
-
RESTORE
SETTINGS
FROM
NON
-
VOLATILE
MEMORY
IN
MEMORY
SLOT
M
The RESTNV
m
command restores the EF1210’s settings to the user (power-up)
defaults stored in the non-volatile memory. This is useful for putting the EF1210 in
its “normal” configuration after someone has changed the settings for a particular
call. See the SAVENV
m
command for information about saving the user defaults in
non-volatile memory.
When the RESTNVm command is sent to the EF1210 by the host, the restore process
begins. When the restore process is complete, the EF1210 sends the RESTNVm mes-
sage back to the host as an acknowledgment. The variables that are saved as a result
of this command are listed at the end of this document. Refer to “Default Values and
Saved Parameter List” on page 84
It is possible to restore one of four (0 - 3) previously saved configurations from mem-
ory. See the SAVENVm command for a discussion of this feature.
Remote Commands
The following command can be sent by the remote control device to restore the
EF1210 to the user defaults.
EF1210 Messages
The EF1210 sends a RESTNV
m
message in response to a command after the restore
process is complete, if acknowledgment mode is enabled.
Example
In the following example, the remote control device restores the default settings of the
EF1210 with Device ID number 12. The EF1210 sends back messages notifying the
remote control device that the parameters have been reset to the default settings.
Remote Command Effects
RESTNV
m
Restore settings from non-volatile memory slot m.
m ranges from 0 to 3.
EF1210 Message Message meaning
RESTNV
m
Settings have been successfully restored from non-
volatile memory slot m.
m ranges from 0 to 3.
Remote Command EF1210 Message
C12RESTNV0 C12RESTNV0
78

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Aspi EF1210 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Aspi EF1210

Aspi EF1210 Zusatzinformation - Englisch - 3 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info