Bedienungsanleitung ASUS A5E (Seite 47 von 74) (Englisch)

51277

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

Using the Notebook PC 4

Power Management Modes

The Notebook PC has a number of automatic or adjustable power saving features that you can use to

maximize battery life and lower Total Cost of Ownership (TCO). You can control some of these features

through the Power menu in the BIOS Setup. ACPI power management settings are made through the

operating system. The power management features are designed to save as much electricity as possible

by putting components into a low power consumption mode as often as possible but also allow full

operation on demand. These low power modes are referred to as “Stand by” (or Suspend-to-RAM) and

“Hibernation” mode or Suspend-to-Disk (STD). The Standby mode is a simple function provided by

the operating system. When the Notebook PC is in either one of the power saving modes, the status will

be shown by the following: “Stand by”: Power LED Blinks and “Hibernation”: Power LED OFF.

Full Power Mode & Maximum Performance

The Notebook PC operates in Full Power mode when the power management function is disabled by

configuring Windows power management and SpeedStep. When the Notebook PC is operating in Full

Power Mode, the Power LED remains ON. If you are conscious of both system performance and power

consumption, select “Maximum Performance” instead of disabling all power management features.

ACPI

Advanced Configuration and Power Management (ACPI) was developed by Intel, Microsoft, and Toshiba

especially for Windows and later to control power management and Plug and Play features. ACPI is the

new standard in power management for Notebook PCs.

NOTE: APM was used in older operating systems like Windows NT4 and Windows 98.

Because newer operating systems like Windows XP, Windows 2000, and Windows ME

utilize ACPI, APM is no longer fully supported on this Notebook PC.

Suspend Mode

In “Stand by” (STR) and “Hibernation” (STD), the CPU clock is stopped and most of the Notebook PC

devices are put in their lowest active state. The suspend mode is the lowest power state of the Notebook

PC. The Notebook PC enters suspend mode when the system remains idle for a specified amount of time

or manually using the [Fn][F1] keys. The Power LED blinks when the Notebook PC is in STR mode. In

STD mode, the Notebook PC will appear to be powered OFF. Recover from STR by pressing any

keyboard button (except Fn). Recover from STD by using the power switch (just like powering

ON the Notebook PC).

Power Savings

In addition to reducing the CPU clock, this mode puts devices including the LCD backlight in their

lower active state. The Notebook PC enters “Stand by” mode (low priority) when the system remains

idle for a specified amount of time. The timeout can be set through Windows power management (higher

priority). To resume system operation, press any key.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ASUS A5E Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ASUS A5E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info