532038
19
Zoom out
Zoom in
Vorherige Seite
1/90
Nächste Seite
Handset settings
LCD language
You can select the language used for all screen displays.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
3. Press MENU/SELECT to choose >LCD language.
4. Press qCID or pDIR to highlight >English, >Français
or >Español, then press MENU/SELECT. The screen prompts
Set English/Français/Español as LCD language?
5. Press MENU/SELECT to confirm. There is a confirmation tone
and the screen returns to the previous menu.
NOTE: If you accidentally change the LCD language to French or Spanish, you can reset it
back to English without going through the French or Spanish menus. Press MENU/SELECT
in idle mode, then enter 364#. There is a confirmation tone.
Caller ID announce
The caller ID announce feature lets you know who’s calling without having
to look at the display. When you have an incoming call, the handset and/or
base speaks “Call from... and the name of the caller based on the directory
or caller ID information. If the caller’s name is private or unknown, the phone
number up to the last 11 digits will be spoken. If the caller’s phone number
is also private or unknown, no information will be spoken. By default, the
caller ID announce feature is programmed On.
To turn on/off the caller ID announce on your handset or base:
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
3. Use qCID or pDIR to scroll to >Caller ID annc, then
press MENU/SELECT.
4. Use qCID or pDIR to highlight the desired option, then
press MENU/SELECT.
Set all On/Off - Change the setting for the base and all
handsets.
Local handset - Change the setting for that handset only.
Base - Change the setting for the telephone base only.
5. Use qCID or pDIR to highlight >On or >Off, then press
MENU/SELECT. There is a confirmation tone and the screen
returns to the previous menu. If you change the setting forIf you change the setting for
Set all On/Off, the screen shows CID Annc ON/OFF on all HS and BS.
HS CID ANNOUNCE
>On
p
q
CALLER ID ANNC
>LOCAL HANDSET
p
q
LCD language
>Caller ID annc
p
q
LCD LANGUAGE
>
English
>
LCD language
Caller ID annc
p
q
p
q
13
Telephone settings
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für AT-T CL82321 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info