Bedienungsanleitung ATAG Blauwe Engel (Seite 19 von 37) (Englisch)

507731

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

Installation instructions S-HR series page 19

User adjustments

To switch from the level to the operating

status level with the read out of the operating

functions , the water temperature and the

water pressure , the following acts must be

carried out. From the display read-out, press the

Step key for 5 seconds after which the operating

status and the water temperature will be shown

for 8 seconds and the water pressure for 2

seconds. If, after this, the Mode key is pressed

briefly the “adjustments” chapter is displayed by

means of the text . By pressing the Step

key briefly the adjustment facilities are shown.

Adjustment of the fixed value can be made by

means of the ‘+’ or the ‘-’ key. Confirmation of the

new setting is done with the Store key.

* ATAG Brain thermostat

Most of the adjustments which are stated in

tables 7 and 8 are unnecessary when in

combination with the Brain and will be taken

care of by the Brain itself and do not have to

be adjusted. Most of the data in table 8 can be

requested by the Brain. For further informa-

tion with regard to the Brain thermostat we

refer to the Brain thermostat installation

manual.

In order to gain access to the adjustments at

installers level the entrance code has to be fed

in first. For this the following operations have to

be carried out.

Press the Mode key for 5 seconds. The text

is shown, after which a random number

appears on the display. By means of the + or the

- key the code can be fed in. After

pressing the Store key the code is confirmed.

With this code the installers level can be

accessed.

The next chapters are shown after pressing the

Mode key:

Chapter 3

The chapter where information can be retrieved.

Chapter 4

The chapter in which adjustments can be made

for service purposes.

Chapter 5

The chapter in which error data can be retrieved.

user adjustment possibilities table 7

stnemtsujdaretemarapresU

petS noitpircsed yrotcaf egnar

gnitaehlartnec.pmetretawwolfmumixamC°58C°09-02

metsysgnitaehlartnecfoepyt104-1

srotcevnoc;gnitaehria;srotaidar

retawwolfxamTC°58.motua

enilgnitaehrotcafK3.2.motua

tneidargnim/C°5.motua

laitnereffidraegC°6.motua

lanoitiddasagnitaehroolfrednurosaeraecafrusegralhtiwsrotaidar

gnitaeh

retawwolfxamTC°07.motua

enilgnitaehrotcafK8.1.motua

tneidargnim/C°5.motua

laitnereffidraegC°5.motua

gnitaehlanoitiddasasrotaidarhtiwgnitaehroolfrednu

retawwolfxamTC°06.motua

enilgnitaehrotcafK5.1.motua

tneidargnim/C°4.motua

laitnereffidraegC°4.motua

gnitaehroolfrednulluf

retawwolfxamTC°05.motua

enilgnitaehrotcafK0.1.motua

tneidargnim/C°3.motua

laitnereffidraegC°3.motua

*01

erutarepmetyadenilgnitaehtnemtsujdaenif05tot5-

*11

erutarepmetthginenilgnitaehtnemtsujdaenif05tot5-

erutarepmetytefastsorfC°3-C°01tot02-

rednilyclanoitiddafoerutarepmetffo-hctiws

reliobRH-Shtiw

C°36C°08-04

)06/15RH-S(yticapacpmupmuminim)%05(%52%001-52

* eeS tatsomrehtniarBGATA

heating line settings graph 2

outside temperature in °C

flowtemperature in °C

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ATAG Blauwe Engel Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ATAG Blauwe Engel

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info