10
installation wall hood
The key dimensions are indicated on page 10.
Set the height of the telescopic pipe within the
allowable range.
Position the discharge and the electrical
connection in such a way that it will be easy to
hook up the hood.
NB:
To prevent deformation, the tower should not
be placed on its flanged edge. Lay the tower on
its rear.
hanging the telescopic pipe
- Draw a centre line on the wall. Hold the
template supplied against the wall (centre
line to centre line). Slide the templates over
each other until you have reached the
correct height. Mark the drill holes.
- Drill the holes (10 mm). Insert plugs. Twist
two nuts in the opposite direction on the
ends of the studs and twist the studs
about 20 mm into the wall. Remove the
nuts.
- Secure the upper telescopic pipe.
- Attach the connecting cable and
discharge hose from the inside. Make
sure the connecting cable is not pinched
or folded.