Bedienungsanleitung ATAG ES 9011 EM (Seite 14 von 15) (Deutsch, Englisch, Holländisch, Französisch)

109596

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

- 14 -

- Take the lower part of the telescopic structure C and

insert it into the upper structure B (fig.5).

Adjust the height by referring to the amounts indicated in

(fig.15) and block it using the 8 screws G that are sup-

plied (fig.6).

- Suction version: fix the flexible pipe to the prepared

air evacuation hole (fig 7).

- Filtering version: fix the flexible pipe to the deflector M

and fix screw I as indicated in (Fig.8), the active carbon

filters must be applied to the suction unit positioned

inside the hood (Fig.17).

- Mount the connecting flange F in the upper part of the

hood’s suction unit using the 2 screws E (fig.9).

- Take the upper chimney piece and fix it to the structure

using the 2 screws A (Fig.10).

Join the lower chimney piece with the upper one and fix

it carefully using adhesive tape L (Fig.11a).

- Unscrew the 2 screws O, max 3 mm (Fig.11a).

Insert the suction unit inside the structure paying atten-

tion that the previously unscrewed screws O, hook into

the slots in the lower part as indicated in (Fig.11b).

Drive in the 3 screws N (supplied) and tighten the 2

screws O (Fig.11b).

- Fix the air evacuation pipe H (not supplied) onto the

connection flange F (Fig.12)

- Remove adhesive tape L and rest the lower chimney

piece above the cooker hood (Fig.13).

-If the cooker hood is supplied with a lower chimney

piece that must be fixed to the hood body with screws,

remove the anti-grease filters from the hood by acting on

the relevant handles (Fig.16). Then screw the lower chim-

ney piece pipe to the inside of the hood, using screws P

(Fig.14). Re-locate the filters in their seat.

USE AND MAINTENANCE

• It is recommended to operate the appliance prior to

cooking.

It is recommended to leave the appliance in operation for

15 minutes after cooking is terminated in order to com-

pletely eliminate cooking vapours and odours.

The proper function of the cooker hood is conditioned by

the regularity of the maintenance operations, in particu-

lar, the active carbon filter.

• The anti-grease filters capture the grease particles

suspended in the air, and are therefore subject to clog-

ging according to the frequency of the use of the appli-

ance.

In order to prevent fire hazard, it is recommendable to

clean the filter at a maximum of 2 months by carrying out

the following instructions:

- Remove the filters from the cooker hood and wash them

in a solution of water and neutral liquid detergent, leaving

to soak.

- Rinse thoroughly with warm water and leave to dry.

- The filters may also be washed in the dishwasher.

The aluminium panels may alter in colour after several

washes. This is not cause for customer complaint nor

replacement of panels.

• The active carbon filters purify the air that is replaced

in the environment. The filters are not washable nor re-

useable and must be replaced at maximum every four

months. The saturation of the active carbon filter de-

pends on the frequency of use of the appliance, by the

type of cooking and the regularity of cleaning the anti-

grease filters.

• Clean the fan and other surfaces of the cooker hood

regularly using a cloth moistened with denatured alcohol

or non abrasive liquid detergent.

• The illumination installation is designed for use during

cooking and not for prolonged general illumination of the

environment. Prolonged use of the illumination installa-

tion notably reduces the duration of the bulb.

COMMANDS: (Fig.18)

Push-button A = on/off lights switch

Push-button B = on/off cooker hood switch. The appli-

ance switches on at speed level 1, If the cooker hood is

on depress the push-button for 2 sec. to switch off the

cooker hood. If the cooker hood is at speed level 1 it will

not be necessary to depress the push-button to switch

the cooker hood off. Decreases the motor speed.

Display C = indicates the motor speed level selected and

activates the timer.

Push-button D = switches on the cooker hood. Increases

the motor speed. Touching the key at 3rd speed, the

intensive function runs for 10', then the appliance go

back to work at the original speed. During this function

the display blinks.

Key E = The Timer times the functions on activation for

15 minutes, after which they are switched off. The Timer

is deactivated by re-pressing Key E. When the Timer is

activated the decimal point must flash on the display.

The Timer cannot be activated if the intensive speed is

functioning.

The “clean air” function is activated by pressing key E

for 2 seconds when the appliance is switched off. This

switches the motor on for 10 minutes every hour at the

first speed. During functioning a rotary movement of the

peripheral segments must be visualised on the display.

When this time has passed the motor switches off and

the fixed letter “C” must be visualised on the display

until the motor re-starts after 50 minutes for another 10

minutes and so on. Press any key apart from the light

keys to return to normal functioning. Press key E to

deactivate the function.

• Active carbon/grease filter saturation:Fig.18

- When display item C flashes, at a speed where it

alternates with the letter F (e.g. 1 and F), the grease

filters must be washed.

- When display item C flashes, at a speed where it

alternates with the letter A (e.g. 1 and A), the carbon

filters must be replaced.

After the clean filter has been positioned correctly, the

electronic memory must be reset by pressing button A

for approximately 5 seconds, until the indication F or A

shown on the display C stops flashing.

THE MANUF

ACTURER DECLINES ALL RESPONSIBILITY

FOR EVENTUAL DAMAGES CAUSED BY BREACHING

THE ABOVE WARNINGS.

ATAG ES 9011 EM Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info