Bedienungsanleitung ATAG hg 6192 p (Seite 37 von 42) (Deutsch, Englisch, Holländisch, Französisch)

335898

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

GB 10

GB 11

MAINTENANCEMAINTENANCE

General

Regular cleaning immediately after use prevents over-cooked food U

being able to become ingrained and cause stubborn stains that are

diﬃcult to remove. Use a mild cleaning agent.

Clean the control knobs, burners and pan supports ﬁrst and then U

the stainless steel drip tray. is avoids the stainless steel drip tray

getting dirty again during cleaning.

Stubborn stains on enamel (pan supports, burner caps)

Remove with a non-abrasive cream or a soft sponge. Never use U

scouring powder, scouring pads, sharp objects or aggressive

cleansing agents.

Stubborn stains on stainless steel (drip trays)

If spilled, acid ﬂuids and sugary foodstuﬀs like red cabbage, U

beetroot, soy sauce, applesauce and rhubarb may cause the surface

to discolour. Stubborn stains on stainless steel are best removed

with a special cleaning agent. Always polish in the direction of the

steel structure to avoid shine spots. (is kind of damage is not

covered by the warranty!)

If the above methods do not remove the stains, clean the plate U

with ATAG Shine. Remember to treat the entire drip tray in order

to avoid discolouring. Also, as a follow-up treat the drip tray with

a polish or maintenance agent for stainless steel. Please note that

over the years the surface will slightly discolour.

Cleaning removable burner components

e removable burner components (including wok) are best U

cleaned with a mild cleaning product and a soft cloth. In the case

of obstinate stains you can soak the parts in hot suds.

Never use scouring powder, scouring pads, sharp objects or U

aggressive cleansing agents.

Your appliance has been manufactured from high-grade materials,

which are easy for you to clean.

Burner parts should not be cleaned in the dishwasher. e parts U

may be damaged by the dishwasher detergent! Do not use too

much water as this can penetrate into the burner or ventilation

openings.

Clean the spark plugs preferably with a cloth. Do this carefully. U

If too much pressure is applied, the distance from the point of the

sparkplug to the burner may change, causing the burner to ignite

poorly or not at all. e sparkplug will only operate correctly in a

dry environment. If the plug is very dirty, you may clean the point

with a tiny brush.

Set the pan supports down vertically, without sliding them over U

the stainless steel drip tray.

Assemble the burner parts using the guide ridges. U

General General

1. Burner head

2. Burner base

3. Sparkplug

4. ermocouple

1. Burner cap outer ring

2. External torch head

3. Internal lid and torch head

4. Gas base

5. Burner base

6. Sparkplug

7. ermocouple

Simmer-, semi-rapid Wok burner

and rapid burner

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ATAG hg 6192 p Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info