111
110
USE
Two cooking zones alongside each other have no effect on each other. So
you can set them both to a high setting at the same time.
Getting used to it...
To start with, you will be surprised by the speed of the appliance. In
particular, bringing things to the boil on the higher setting is very fast. To
prevent a dish boiling over or boiling dry, the best thing is to always stay
beside the hob. In the case of induction cooking, it is only the part of the
zone on which the pan stands that is used. If you use a small pan on a
large zone, the power will be adjusted to the diameter of the pan.
The power will thus be lower and it will take longer before the food in
the pan comes to the boil. You will achieve the best result by using a pan
that has the same dimensions as the cooking zone. If you use a pan with
a base that is too small, the cooking zone will not switch on.The
minimum pan base diameter is 12 cm.
Setting 9
Only switch the hob on at setting 9 if you want to boil water. This
setting is too high for heating butter or milk and much too high for
defrosting.
Consult the cooking tables to help you learn the techniques.
Setting 8
Setting 8 is the grill setting. This setting is suitable for grilling meat.
Setting 9 is far too fast for this; the milk constituents in the margarine
burn before the margarine has melted.
setting
Power
The power for the zone front left can be set between 50 and 3100 Watts,
for the zone rear left between 50 and 2000 Watts and for the zones right
between 50 and 2800 Watts.
Two cooking zones one in front of the other are operated by one
generator. The advantage of this is that a high power level can be realised
for a cooking zone. This is ideal for bringing food and liquids to the boil
very quickly, for frying and for searing large quantities. When both of
these cooking zones are switched on at the same time, the power is
automatically shared between them. Up to setting 5, this does not have
any consequences. If, however, you set one cooking zone to setting 5 or
higher, the other cooking zone will automatically switch down to a lower
setting, see table.
The zone you have set last can be set until setting 5. In case you wish you
select a higher setting, reduce the setting of the other zone first.
Maximum combinations:
Two cooking zones alongside each other have no effect on each other. So
you can set them both to a high setting at the same time. You will hear a
ticking sound if two cooking zones one in front of the other are switched
on at the same time. This is caused by the appliance switching over from
the rear cooking zone to the front one and back again.
USE setting
Zone front Zone rear
5 9
5 with dot
8
7
7
8 5 with dot
9
5
