operation
extra security
Various protective devices have been fitted in the appliance
to protect the electronics and your cooking utensils. If the
appliance has been installed correctly, the protective devices
will rarely, if ever, have to come into operation.
cooking-time limiter
The cooking-time limiter switches the cooking zones off after
a certain time, depending on the setting.
The time begins from the moment a setting has been
selected. When a new selection of a cooking setting is made,
therefore, the time begins again.
The table below shows the time taken before the cooking-
time limiter switches the cooking zone off at the various
settings. This does not apply to the (Powerboost) cooking
setting. After 5 minutes, this automatically switches down to
(boost).
setting power power power time
ø 16 cm ø18 cm ø 23 cm
rear left both right front left
zone zones zone
0- --10 sec.
1 50 W 50 W 50 W 9 hours
2 100 W 100 W 100 W 9 hours
3 150 W 200 W 225 W 5 hours
4 200 W 300 W 325 W 5 hours
5 275 W 400 W 450 W 5 hours
6 400 W 500 W 600 W 4 hours
7 650 W 750 W 825 W 4 hours
8 950 W 1000 W 1100 W 4 hours
9 1400 W 1400 W 1400 W 3 hours
10 1800 W 1800 W 1800 W 2 hours
11 2050 W 2050 W 2400 W 1 hour
12/b 2200 W 2800 W 2800 W 1 hour
Pb - - 3200 W 5 min.
GB 17
operation
switching on
programming memory function (record)
1
Press the 'memory' button until the light next to
'RECORD' comes on.
The lights next to 'REAR' and 'FRONT' start to flash and
000 appears in the clock display.
2 Switch on the cooking zone that should be recorded.
3 Select a cooking setting, using the + or – buttons.
The selected cooking setting and the cooking time are
now recorded. Several cooking settings can be selected
in succession (max. 38).
If, during a recording, 38 settings have already been
recorded, the next step that is recorded will automatically be
the end of the recording.
End the recording using the on/off button or the 'memory'
button .
When a new recording is entered, any existing recording is
erased.
The selected cooking settings and cooking times are now in
the memory. This recording can be activated using the 'PLAY'
function (switch on memory).
A maximum of 1 recording can be made per zone.
GB 16
memory
