7
Mount the freezer and refrigerator
compartment doors
Feed water pipe Installation
Pass the refrigerator laterally through the access
door as shown in the right figure.
$
Automatic ice maker operation needs water pressure of 147~834 kPa (1.5~8.5
kgf/cm
2
) (That is, an instant paper cup (180 cc) will be fully filled within 3 sec.).
$
If water pressure does not reach the rating 147 kPa (1.5 kgf/cm
2
) or below, it is
necessary to purchase a separate pressure pump for normal automatic icing and
cool water feed.
$
Keep the total length of the feed water pipe tube within 12 m and be careful for the
tube not be bent straightly. If the tube is 12 m or longer it may cause trouble in
water feed owing to the drain water pressure.
$
Install the feed water pipe tube at a place free from heat.
$
Connect to potable water supply only.
Mount them in the reverse sequence of removal after they pass through the access
door.
Pass the
refrigerator
Before
installation
Warning
Installation
