Bedienungsanleitung ATAG KA2211DL (Seite 147 von 164) (Deutsch, Englisch, Holländisch, Französisch)

556990

147

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

operating _27

02 OPERATING

Filter Indicator

When the ﬁlter indicator light is on, it is time to change the ﬁlter. Typically this happens about

every 6 months.

After removing the old water ﬁlter and installing a new one (see page 38 for instructions on how to

do this), reset the indicator status light by pressing the Ice Type button for about 3 seconds.

The indicator will light again in about 6 months to let you know it is time to change your water ﬁlter.

When you do not use the water ﬁlter, press the Ice Type button for more than 5 seconds, the Filter

indicator lamp and the Filter Change letters will be off.

Child Lock

This icon will light up when you activate the Child Lock function by pressing the Vacation button

and the Fridge button simultaneously for 3 seconds. Press these two buttons for 3 seconds

again to reactivate.

Ice type

Cubed Ice, Crushed Ice and turnning the Ice maker off.

Enjoy cubed or crushed ice by selecting your preference

from the digital control panel. If you don’t need ice, turn

the feature off to save on water and energy consumption.

The Ice type light indicates the type of ice (or no ice) that is

currently chosen.

CONTROLLING THE TEMPERATURE

CONTROLLING THE FREEZER TEMPERATURE

The freezer temperature can be set between -14°C (8°F) and -25ºC (-14°F) to suit your particular

needs. Press the Freezer button repeatedly until the desired temperature is shown in the

temperature display. Keep in mind that foods like ice cream may melt at -16ºC (4°F).

The temperature display will move sequentially from -14°C (8°F) and -25ºC (-14°F). When the

display reaches -14ºC (8°F), it will begin again at -25ºC (-14°F).

Five seconds after the new temperature is set the display will again show the actual current freezer

temperature. However, this number will change as the Freezer adjusts to the new temperature.

CONTROLLING THE FRIDGE TEMPERATURE

The refrigerator temperature can be set between 7ºC (46°F) and 1ºC (34°F) to suit your particular

needs. Press the Fridge button repeatedly until the desired temperature is shown in the

temperature display. The temperature control process for the Fridge works just like the Freezer

process. Press the Fridge button to set your desired temperature. After a few seconds, the Fridge

will begin tracking towards the newly set temperature. This will be reﬂected in the digital display.

The temperature of the freezer or the refrigerator may rise from opening the doors too

frequently, or if a large amount of warm or hot food is placed in either side. This may cause the

digital display to blink. Once the freezer and refrigerator return to their normal set temperatures

the blinking will stop. If the blinking continues, you may need to “reset” the refrigerator. Try

unplugging the appliance, wait about 10 minutes and then plug back in.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ATAG KA2211DL Seite 147

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info