Bedienungsanleitung ATAG KA2411L (Seite 17 von 52) (Deutsch, Englisch, Holländisch, Französisch)

556988

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Freezer temperature indicator

Freezer compartment indicator

Alarm indicator

Child Lock function

Drinks Chill function

Switching on

To switch on the appliance do these steps:

1. Connect the mains plug to the power

socket.

Press the ON/OFF button if the display

is off.

3. The alarm buzzer may sound after a

few seconds.

To reset the alarm refer to "Door open

alarm".

If “DEMO” appears on the Display, the

appliance is in demonstration mode: re-

fer to “Troubleshooting” paragraph.

4. The temperature indicators show the

set default temperature.

To select a different set temperature refer to

"Temperature regulation".

Switching off

To switch off the appliance do these steps:

Press the ON/OFF button for 5 sec-

onds.

2. The display switches off.

To disconnect the appliance from the

power disconnect the mains plug from

the power socket.

Switching off the wine cellar

To switch off the wine cellar:

Press the Functions button until the

corresponding icon appears.

The wine cellar Off indicator and the

wine cellar compartment indicator flash.

The wine cellar temperature indicator

shows dashes.

Press the OK button to confirm.

The wine cellar Off indicator is shown.

Switching on the wine cellar

To switch on the wine cellar:

1. Press the Functions button until the

corresponding icon appears.

The wine cellar Off indicator flashes.

2. Press the OK button to confirm.

3. The wine cellar Off indicator goes off.

To select a different set temperature refer to

"Temperature regulation".

Temperature regulation

The set temperature of the wine cellar and

of the freezer may be adjusted by pressing

the temperature buttons

Set default temperature:

• + 10°C for the wine cellar

• -18°C for the freezer

The temperature indicators show the set

temperature.

The set temperature will be reached within

24 hours.

Important! After a power failure the set

temperature remains stored.

Drinks Chill function

The Drinks Chill function is to be used to

set an acoustic alarm at the preferred time,

useful for example when you want to rapidly

chill a bottle of wine for a certain length of

time.

To switch on the function:

1. Press the Functions button until the

corresponding icon appears.

The Drinks Chill indicator flashes.

The Timer shows the set value (30 mi-

nutes) for a few seconds.

Press the Temperature colder or Tem-

perature warmer button to change the

Timer set value from 1 to 90 minutes.

3. Press the OK button to confirm.

The Drinks Chill indicator is shown.

The Timer start to flash (min).

At the end of the countdown the Drinks

Chill indicator flashes and an audible alarm

sounds:

1. press OK button to switch off the

sound and terminate the function.

It is possible to deactivate the function at

any time during the countdown:

1. Press the Functions button until the

Drinks Chill indicator flashes.

2. Press the OK button to confirm.

The Drinks Chill indicator goes off.

It is possible to change the time at any time

during the countdown and at the end by

pressing the Temperature colder button

and the Temperature warmer button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ATAG KA2411L Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info