GB 9
freezer drawers
removal
1. Open the drawer as far as possible.
2. Lift the drawer up a bit at the front.
3. Pull the drawer over the end block, out of the freezer
compartment.
insertion
Replace the drawer in the reverse order.
door compartments
All the door compartments are removable. The height of two
of them can be adjusted.
removal
1. Empty the door compartment.
2. Lift the door compartment straight up until the fastening
grooves on the left and right sides in the door come free.
3. Remove the door compartment.
insertion
1. Choose the height required.
2. Press the door compartment into the fastening grooves in
the door.
use
shelves, drawers and door compartments
GB 8
use
shelves, drawers and door compartments
introduction
The glass shelves can be set at different heights according to
requirements. The vegetable and freezer drawers can be
removed completely. The freezer drawers are fitted with an
end block, so that they cannot be pulled all the way out of
the refrigerator with freezer by mistake.
shelves
removal
1. Empty the shelf.
2. Push the shelf up at the front, so that
it is no longer held in place.
3. Remove the shelf by sliding it
forwards, out of the groove.
insertion
1. Select the height required.
2. Slide the shelf to the rear, into the
groove.
3. Push the shelf down at the front, until
it clicks into place.
vegetable drawers
Remove the vegetable drawer by pulling it directly forwards
out of the refrigerator compartment. Replace in the reverse
order.
