Bedienungsanleitung ATAG KD 8122 BF (Seite 21 von 35) (Deutsch, Englisch, Holländisch, Französisch)

76319

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

* Depending on model and options

Setting the temperature

The appliance is pre-set for normal operation. We recommend

temperatures of +5°C in the refrigerator.

This will ensure an average frozen food temperature of approx.

-18°C in the

freezer compartment*.

In the refrigerator:

W To reduce the temperature:

Press the DOWN button 2.

W To increase the temperature:

Press the UP button 2.

- While you are entering the temperature, the

set temperature

will flash

on the display.

- When you press the temperature setting buttons for the first

time, the

most recent setting (known as the "reference

setting

") is displayed.

- You can change the settings in increments of 1°C by briefly

pressing the buttons again. If the buttons are held down the

temperature setting will change faster.

- The system switches over automatically about 5 seconds after

the button was last pressed and displays the

average cooling

temperature (known as the

"actual setting").

- You can change the temperatures in the refrigerator between

9°C and 4°C.

W The temperature in the Climat-Freshbox compartment is

controlled

automatically, between 0°C and 3°C.

If you require a higher or lower temperature, e.g. for storing fish,

you can

alter the temperature setting in the Bio-Fresh compart-

ment. See "Additional functions" for more information.

Temperature display

The average temperature in the refrigerator compartment

is displayed in normal mode.

If "

F0" to "F5" appears in the display, the appliance has a fault.

Consult the customer service department indicating the fault

number displayed, so that they can arrange for your appliance to

be serviced accurately and quickly.

Audible warning signal

The audible warning signal helps you to protect the food in your

refrigerator and save energy.

- It will sound when the

door has been open for longer than

about 1 minute

W The signal will stop when you press the audible warning

on/off button

- and when you close the door.

- The sound switch-off function is active as long as the door is

left open. The alarm

function automatically switches back to

standby when the door is shut.

Fast-Cooling

The Fast-Cooling button switches the appliance to maximum

cooling.

It is recommended particularly if you wish to cool

large quantities

of food, drinks, freshly baked cakes or meals rapidly.

W To switch on: Press the Fast-Cooling button 4 briefly so that

it lights up. The refrigerator temperature will drop to its lowest

value.

Note: The Fast-Cooling function uses slightly more energy. After

approx. 6 hours, however, the appliance switches back

auto-

matically

to normal energy-saving operation.

Additional functions

In set-up mode you can set the child-proof lock, adjust the

brightness of the display* and set the temperature in the

Climat-Freshbox compartment slightly lower or higher.

Activating set-up mode:

Press the Fast-Cooling button for approx. 5 secs - the Fast-Cool-

ing button flashes - the display shows

c for child-proof lock.

Note: the value to be altered flashes.

W Select the required function by pressing the Up/Down button:

c = child-proof lock,

h = brightness or

b = Climat-Freshbox temperature.

W Now select/acknowledge the function by pressing the Fast-

Cooling button briefly:

• For

c = child-proof lock, press the Up/Down

button to select c

1 = child-proof lock on or c0

= child-proof lock

off and acknowledge with the

Fast-Cooling button. When the symbol

is lit,

the child-proof lock is activated.

• For

h = brightness, press the Up/Down button to

select h

1 = minimum to h5 = maximum bright-

ness

and acknowledge with the Fast-Cooling

button.

• For

b = Climat-Freshbox temperature, press

the Up/Down button to select from b

1 = lowest

b9 = highest setting and confirm with the

Fast-Cooling button. The altered Climat-Freshbox

temperature adjusts slowly to the new value.

Note: b5 = factory setting. By decreasing the

temperature, "b4" to "b1", minus temperatures can

be reached and the food in the Climat-Freshbox

compartment will freeze slightly.

Exiting set-up mode:

To exit the set-up mode, press the On/Off button; after 2 mins.

the electronic system switches over automatically.

- The normal operating mode is activated again.

Refrigerator compartment

Arranging food in the refrigerator

It is warmest at the front at the top and in the door (suitable for

spreadable butter, cheese etc.).

Notes on cooling

- Store food so that the air can circulate freely and ensure that

the food is not packed too closely together.

Do not cover the

fan slits* at the back, otherwise the refrigerating capacity will

be impaired!

- Food which gives off or absorbs odours and flavours, and liquids

should always be stored covered or in closed containers.

Changing shelf arrangement

W You can change the position of the jar rack* and remove all

door racks for cleaning: Slide the door rack up, pull out towards

you and replace in reverse order.

W By adjusting the bottle/can holder

you can protect the bottles from falling

over when the door is opened and

closed. Always hold by the plastic

handle.

The holder can be removed for clean-

ing: pull the bottom edge of the holder

towards you and lever out.

ATAG KD 8122 BF Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info