Bedienungsanleitung ATAG KD 8122 BF (Seite 25 von 35) (Deutsch, Englisch, Holländisch, Französisch)

76319

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

* Depending on model and options

Troubleshooting

Your appliance is designed and manufactured for a long life span

and reliable operation.

If a malfunction nonetheless occurs during operation, check

whether it is due to an operating error. Please note that even dur-

ing the warranty period the resultant servicing costs in this case

will have to be borne by the owner.

You may be able to rectify the following faults by checking the

possible causes yourself:

Malfunction - Possible cause and remedy

______________________________________________

Appliance does not work, display is off

- Is the appliance switched on properly?

- Is the mains plug properly inserted in the socket?

- Is the socket fuse intact?

The interior light does not come on

- Is the appliance switched on?

- Has the door been open for more than 15 minutes? The interior

light switches off automatically after the door has been opened

for approx. 15 minutes.

- If the interior light does not switch on when the door is opened

briefly, but the temperature display is working, the light may be

defective.

Mains Voltage

Important! To prevent injury or damage, always ask our

customer service department to carry out any repairs and

replace the LED interior light.

Caution - class 1M laser radiation. When cover

is removed, do not look directly at light through

optical instruments.

Loud running noise

- Is the appliance standing firmly on the floor, or does the com-

pressor cause nearby items of furniture or objects to vibrate?

If necessary, move bottles and containers apart.

Burbling noises are normal. These are caused by the refriger-

ant flowing round the refrigerant circuit.

A short

clicking sound: This will be heard whenever the

refrigeration unit (the motor) switches on or off automatically.

Motor noise: This will be slightly louder for a brief period when

the refrigeration unit switches on.

The audible warning signal sounds

- Is the appliance closed properly?

Check the appliance as described in "Audible warning sig-

nal".

The temperature is not cold enough

- Is the temperature setting correct? If necessary, set a lower

temperature and check the display after 24 hours.

- Does the door close properly?

- Is the appliance built in properly?

- Is the appliance sufficiently well ventilated?

Clear ventilation grilles if necessary.

- Is the ambient temperature too hot? (See "Safety regula-

tions")

- Has the appliance been opened too often or left open too

long?

- If applicable, wait until the appliance reaches the required

temperature itself.

Customer service and type plate

If none of the above causes apply and you cannot rectify

the fault yourself, or if the temperature display reads "F0"

to "F5", this means that there is a fault. Please contact your nearest

customer service department (see enclosed list for addresses),

indicating the fault number displayed, together with the

type designation 1,

service number 2 and

appliance number 3

as given on the type plate. This

will help us to provide you with

a faster and more accurate

service. The type plate is lo-

cated on the inside left of the

appliance next to the bottom

Climat-Freshbox drawer.

Leave the appliance shut until the customer service engineer ar-

rives so as to prevent any further cold loss.

_______________________________________________

All types and models are subject to continuous improvement and

the manufacturer therefore reserves the right to make modifications

in the shape, equipment and technology.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ATAG KD 8122 BF Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info