Bedienungsanleitung ATAG KD 8140 AF (Seite 20 von 35) (Deutsch, Englisch, Holländisch, Französisch)

76322

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

* Depending on model and options

children) with reduced physical, sensory or mental ca-

pabilities or lack of experience and knowledge unless

they have been given initial supervision or instruction

concerning use of the appliance by a person responsible

for their safety. Children should be supervised to ensure that

they do not play with the appliance.

W Avoid prolonged skin contact with cold surfaces or chilled/frozen

food. This could cause pain, numbness and frostbite. In the

case of prolonged skin contact, protective measures should

be taken, e.g. gloves should be worn.

W Do not eat ice cream, particularly ice lollies or ice cubes, imme-

diately after taking them from the freezer compartment as there

is a risk of "burning" because of the very cold temperatures.

W Do not consume food which has been stored for too long, as it

could cause food poisoning.

Installation and ventilation information

W Avoid positioning in direct sunlight or next to an oven,

radiator or similar.

W Do not block the ventilation areas. Always

ensure that the appliance is properly venti-

lated.

Condensation may form on the outside of the

refrigerator/freezer during periods of high

humidity.

Constant ventilation of the installation site is recom-

mend.

W Standard EN 378 specifies that the room in which you install

your appliance must have a volume of 1 m

per 8 g of R 600a

refrigerant used in the appliance, so as to avoid the formation

of inflammable gas/air mixtures in the room where the appli-

ance is located in the event of a leak in the refrigerant circuit.

The quantity of refrigerant used in your appliance is indicated

on the type plate on the inside of the appliance.

W Only install the refrigerator/freezer in stable furniture.

W Please follow the enclosed installation instructions.

Operation and control elements

You are advised to clean the appliance before switching it on for

the first time (see "Cleaning").

If your appliance has a freezer compartment, switch it on approx. 2

hours before filling the freezer with frozen food for the first time.

Connecting to the mains

Power supply (AC) and voltage

at the operating point must comply with the details on the

type plate. The type plate is located on the inside left of

the appliance, fig.

W The appliance must be connected with a properly

installed fused socket.

W The socket must have a 10 A fuse or higher. It must be away

from the back of the appliance and easily accessible.

W Do not

- connect to stand-alone inverters and

- operate with so-called energy-saving plugs - this can damage

the electronic system,

- connect to the supply with other electrical equipment using a

distributor strip or an extension cable - risk of overheating or

fire.

W When removing the mains cable from the back of the appliance,

remove the

cable holder to prevent vibration noise.

The wires in the mains lead are coloured in accordance with the fol-

lowing code: green/yellow = earth, blue = neutral, brown = live.

Warning! This appliance must be earthed.

Non-rewireable plugs BS 1363

If this machine or appliance is fitted with a non-rewireable plug, the

following information applies: If the socket outlets are not suitable

for the plug supplied with this product, it must be cut off and an

appropriate plug fitted. The plug cut from the flexible cord should

be disposed of and on no account be inserted into a 13 A socket

elsewhere in the house (electric shock hazard).

The fuse cover must be re-fitted when changing the fuse, and if the

fuse cover is lost the plug must not be used until a suitable replace-

ment is obtained. The colour of the correct replacement cover is

that of the coloured insert in the base of the plug, or the colour that

is embossed in words on the base of the plug (as applicable to the

design of the plug fitted). The correct rating of the replacement fuses

that are ASTA approved to BS 1362 should be fitted. Replacement

fuse covers may be purchased from your local electrical suppliers,

electricity showroom or approved service agent.

Switching the appliance on and off

W To switch on: Press the on/off button 3 so that the tempera-

ture display lights up or flashes.

- The lighting will light up when the door is open.

W To switch off: Press the on/off button for approx. two seconds

so that the temperature display goes out.

Notes on energy saving

W Ensure that there is adequate space around the ap-

pliance for ventilation and air extraction.

W Avoid keeping the door open for too long.

W Store food logically. Do not exceed the storage period speci-

fied.

W Keep all food properly packed and covered so as to avoid its

frosting up on the outside.

W Always allow hot food to cool to room temperature before plac-

ing in the appliance.

W Defrost frozen food in the refrigerator.

W If an ice layer forms in the freezer compartment*, you should

defrost it. This will improve the cold transfer and reduce energy

consumption.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ATAG KD 8140 AF Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info