Bedienungsanleitung ATAG KD61178B (Seite 27 von 28) (Deutsch, Englisch, Holländisch, Französisch)

556976

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Before contacting the After-Sales Service:

Switch the appliance on again to see if the

problem has been solved. If it has not, unplug

the appliance and wait for about an hour before

switching on again.

If the appliance is still not working after you

have gone through all the checks listed in the

troubleshooting guide and switched it off then

on again, contact the After-Sales Service to

explain the problem and have the following

information ready:

• thetypeoffault

• themodel

• thetypeandserialnumberoftheappliance

(given on the rating plate)

• theServicenumber(thenumberafterthe

word SERVICE on the rating plate inside the

appliance)

Note:

the door opening direction can be

changed. If this operation is performed by

the After-Sales Service it is not covered by

the warranty.

AFTER-SALES SERVICE

Warning - this appliance must be earthed

Fuse replacement

If the mains lead of this appliance is fitted with a BS 1363A

13amp fused plug, to change a fuse in this type of plug use an

A.S.T.A. approved fuse to BS 1362 type and proceed as follows:

1. Remove the fuse cover (A) and fuse (B).

2. Fit replacement 13A fuse into fuse cover.

3. Refit both into plug.

Important:

The fuse cover must be refitted when changing a fuse and if

the fuse cover is lost the plug must not be used until a correct

replacement is fitted. Correct replacement are identified by

the colour insert or the colour embossed in words on the

base of the plug. Replacement fuse covers are available from

your local electrical store.

For the Republic of Ireland only

The information given in respect of Great Britain will frequently apply, but a third type of plug and

socket is also used, the 2-pin, side earth type.

Socket outlet / plug (valid for both countries)

If the fitted plug is not suitable for your socket outlet, please contact After-sales Service for further

instruction. Please do not attempt to change plug yourself. This procedure needs to be carried out

by a qualified technician in compliance with the manufactures instructions and current standard

safety regulations.

ELECTRICAL CONNECTION FOR GREAT

BRITAIN AND IRELAND ONLY

Note: the upper shelf and the side supports cannot be removed.

To restore “Zero Degrees” box operation, make sure you replace the white plastic shelf

underneath the box before inserting the drawer and reactivating the function. To optimise energy

consumption, we recommend you deactivate the “Zero Degrees” box and remove it.

Clean the box and all its parts regularly, using a cloth and a solution of warm water and neutral

detergent specifically formulated for refrigerator interiors (take care not to immerse the white

plastic shelf underneath the box in water).

Before cleaning the box (including the outside), remove the drawer so as to disconnect

the box from the electricity supply.

Never use abrasive detergents.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ATAG KD61178B Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info