Bedienungsanleitung ATAG KD80102ADN (Seite 19 von 32) (Deutsch, Englisch, Holländisch, Französisch)

675552

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

5 Control

5.1 Child proofing

The child-proofing function enables you to make

sure that the appliance is not inadvertently switched

off by playing children.

5.1.1 Setting the child lock

To activate the setting mode:

Press the Fast Cool button

Fig. 2 (4)

for approx. 5 seconds.

The Menu symbol is shown on the display,

Fig. 2 (8)

c flashes on the display.

To switch on the function:

Briefly confirm using the Fast Cool button

Fig. 2 (4)

c1 appears on the display.

Briefly confirm using the Fast Cool button

Fig. 2 (4)

The child lock symbol,

Fig. 2 (9)

, lights up on the

display.

c flashes on the display.

The child lock function is switched on.

If the function is to be switched off:

Briefly confirm using the Fast Cool button

Fig. 2 (4)

c0 appears on the display.

Briefly confirm using the Fast Cool button

Fig. 2 (4)

c flashes in the display.

The child lock function is switched off.

To end the setting mode:

Briefly press the On/Off button

Fig. 2 (1)

The temperature display shows the temperature again.

5.2 Refrigerator compartment

The natural circulation of air in the refrigerator compartment

results in zones differing in temperature. It is coldest directly

above the vegetable drawers and at the rear wall. It is warmest

at the top front of the compartment and in the door.

5.2.1 Food refrigeration

Note*

The energy consumption increases and the cooling perform-

ance decreases if the ventilation is inadequate.

Always keep the air slits of the fan free.

Store perishable food such as ready-to-serve dishes, meat

products and sausages in the coldest zone. Place butter and

preserves in the upper area and in the door (see Appliance

at a glance).

Use recyclable plastic, metal, aluminium and glass

containers and cling film for wrapping.

Always store liquids and food which is subject to odour or

taste transfer in closed containers or cover them.

Foods which give off a large amount of ethylene gas and

delicate foods, such as fruit, vegetables, salad, should

always be stored separately or wrapped so as not to reduce

the storage life; e.g. do not store tomatoes together with

kiwis or cabbage.

for appliances from 1218 mm in height, the following applies:

Use the front area of the refrigerator compartment floor only

for briefly putting down cooled products, e.g. when rear-

ranging and sorting. However do not leave cooled products

there otherwise they may be pushed back or tipped over

when the door is closed.

Do not store food too close together to enable good air

circulation.

5.2.2 Setting the temperature

The temperature depends on the following factors:

the frequency of opening the door

the room temperature of the installation location

the type, temperature and quantity of the food

Recommended temperature setting: 5 °C

The temperature can be adjusted continually. Once the 1 °C

setting is reached, the sequence starts again at 9 °C .

Call up the temperature function: Press the "+/-"

setting button

Fig. 2 (3)

The previously-set value will flash in the tempera-

ture display.

Change the temperature in 1 °C steps: Press the

"+/-" setting button

Fig. 2 (3)

until the required

temperature is indicated in the temperature

display.

Change temperature continually: hold down

setting button.

During adjustment the value flashes on the display.

The new setting is adopted approx. 5 seconds after the last

time the button was pressed and the set temperature

displayed again. The temperature in the interior gradually

adjusts to the new value.

5.2.3 Fast Cool

Use Fast Cool to activate the highest cooling

performance to reach lower cooling temperatures.

Fast Cool is used for rapidly cooling large amounts of

food.

The fan is in operation when Fast Cool is switched on*. The

appliance operates with the maximum cooling capacity; conse-

quently, noises emitted by the cooling unit may be temporarily

louder.

Fast Cool has a slightly higher energy consumption

To cool using Fast Cool

Briefly press the Fast Cool button

Fig. 2 (4)

The Fast Cool symbol

Fig. 2 (5)

illuminates in the display.

The cooling temperature drops to the coldest value.

Fast Cool is switched on.

Fast Cool automatically switches itself off after approx. 12 h.

The appliance continues to function in the energy-saving

normal mode.

To switch off Fast Cool ahead of time

Briefly press the Fast Cool button

Fig. 2 (4)

The Fast Cool symbol

Fig. 2 (5)

goes out in the display.

Fast Cool is switched off.

5.2.4 Fan*

With the fan you can rapidly cool large quantities of

fresh food or achieve a relatively even distribution of

temperature across all the storage levels.

The forced-air cooling is to be recommended:

at high room temperature (above33 °C )

at high humidity

The forced-air cooling uses slightly more energy. To save

energy, the fan switches off automatically when the door is

open.

Switching on the fan*

Briefly press the fan button

Fig. 2 (6)

The fan symbol

Fig. 2 (7)

illuminates.

Control

* Depending on model and options 19

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ATAG KD80102ADN Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ATAG KD80102ADN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info