336557
64
Zoom out
Zoom in
Vorherige Seite
1/70
Nächste Seite
INSTALLATION INSTRUCTIONS
Top-wood
GB 24
Use the screws supplied to fasten the positioning plate (A)
against the bottom of the worktop so that the holes are
aligned. Use the light rings as fitting pins.
When mounting the knobs into the worktop the sealing
rings (B) should be mounted underneath the light rings.
Place the light rings (B) from the top through the holes in
the worktop and fasten them from the top with the screws
supplied.
Place the springs on the pins (C) and push them from the
bottom through the light rings in the worktop.
Place the conical springs on the control knobs (D).
3.
4.
5.
6.
7.
positioning plate (1x)
control knob (2x)
conical spring (2x)
rosette (2x)
light ring (2x)
screw (4x)
sealing ring (2x)
screw (4x)
pin (2x)
pin Z
hole Y
spring (2x)
nut M4 (2x)
control box
(A)
(B)
(D)
(C)
(E)
INSTALLATION INSTRUCTIONS
Top-wood
GB 25
The teppan yaki comes with two sets of rosettes. For this
installation situation you need to use the following rosettes
so that the temperatures are easy to read. Attention: the
rosette with the
symbol belongs to the front zone, the
rosette with the
symbol belongs to the rear zone).
Press the rosettes from the top onto the pins.
Press the control knobs onto the pins.
Lead the control box and the mains plug through the cut-
out in the worktop.
Position the control box (E) against the positioning plate so
that pin Y falls into hole Z.
Use the nuts that were supplied with the product to secure
the control box to the positioning plate.
Turn the teppan yaki over and place it in the cut-out.
Place the dripping pan into the teppan yaki.
Connect the appliance to the mains. The hob is now ready
for use.
Check if the appliance works properly.
Give the user manual to your client or, if you own the
teppan yaki, store the manual in a safe place.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
5050
F R
Worktop
64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ATAG ty 3011 m wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info