Bedienungsanleitung ATAG VA 6311 AF (Seite 5 von 24) (Englisch)

75793

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

The digital display

The digital display indicates:

• the level of hardness to which the water

softener is set,

• the approximate remaining time of the run-

ning programme,

• activation/deactivation of the rinse aid

dispenser (ONLY with 'Multitab function'

active),

• the end of a washing programme (a zero

will appear in the digital display),

• the countdown for the delay start,

• fault codes concerning malfunction of the

dishwasher.

Function buttons

The following functions can be set using

these buttons:

• setting the water softener level,

• cancelling a washing programme or a de-

lay start in progress,

• activation/deactivation of the Multitab

function,

• activation/deactivation of the rinse aid

dispenser when Multitab function is active.

Setting mode

Press the On/Off button. ALL programme

button lights come on. Programme in pro-

gress indicator light is off. The appliance is in

setting mode.

Always remember that when performing

the following operations:

– selecting a washing programme,

– setting the water softener level,

– activating/deactivating the rinse aid,

the appliance MUST be in setting mode.

Press the On/Off button. Only 1 programme

button light comes on. The programme in

progress indicator light comes on. The last

performed or selected programme is still set.

In this case, to return to setting mode, the

programme has to be cancelled.

To cancel a set programme or a

programme in progress

Simultaneously press and hold the two func-

tion buttons B and C until all the programme

button lights and the programme in progress

indicator light come on. The programme has

been cancelled and the machine is now in

setting mode.

First use

Before using your dishwasher for the first

time:

• Ensure that the electrical and water con-

nections comply with the installation in-

structions

• Remove all packaging from inside the ap-

pliance

• Set the water softener level

• Pour 1 litre of water into the salt container

and then fill with dishwasher salt

• Fill the rinse aid dispenser

If you want to use combi detergent

tablets such as: ''3 in 1'', ''4 in 1'', ''5

in 1'' etc... set the Multitab function.

(See ''Multitab function'').

Set the water softener

The dishwasher is equipped with a water

softener designed to remove minerals and

salts from the water supply, which would

have a detrimental or adverse effect on the

operation of the appliance.

The higher the content of these minerals and

salts, the harder your water is. Water hard-

ness is measured in equivalent scales, Ger-

man degrees (dH°), French degrees (°TH)

and mmol/l (millimol per litre - international

unit for the hardness of water).

The softener should be adjusted according

to the hardness of the water in your area.

Your local Water Authority can advise you on

the hardness of the water in your area.

The water softener must be set in two

ways: manually, using the water hard-

ness dial and electronically.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ATAG VA 6311 AF Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ATAG VA 6311 AF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info