Bedienungsanleitung ATAG VA 6311 AF (Seite 12 von 24) (Englisch)

75793

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

If the drying results are not

satisfactory we suggest that you:

1. Fill up the rinse aid dispenser with

rinse aid.

2. Activate the rinse aid dispenser.

3. Set the rinse aid dosage to position

• The activation/deactivation of the

rinse aid is only possible with the Mul-

titab function active.

Activation/deactivation of the rinse aid

dispenser

1. Press the On/Off button. The dishwasher

must be in setting mode.

2. Simultaneously press and hold function

buttons B and C, until the lights of func-

tion buttons A , B, and C start flashing.

3. Press function button B, the lights of

function buttons A and C go off while the

light of function button B continues to

flash. The digital display indicates the cur-

rent setting.

Rinse aid dispenser deactivated

Rinse aid dispenser activated

4. To change the setting, press button B

again, the digital display indicates the

new setting.

5. To memorize the operation, switch off the

dishwasher by pressing the On/Off but-

ton.

If you decide to revert back to the

use of individual detergents we ad-

vise that you:

1. Deactivate the Multitab function.

2. Fill up the salt container and the rinse

aid dispenser again.

3. Adjust the water hardness setting to

the highest setting and perform 1

normal washing programme without

loading any dishes.

4. Adjust the water hardness setting

according to the hardness of the wa-

ter in your area.

5. Adjust the rinse aid dosage.

Select and start a washing programme

Select the washing programme and

delay start with the door slightly

opened. The start of the programme

or the countdown of the delay start

will occur only after the closure of

the door. Until then it is possible to

modify the settings

1. Check that the baskets have been loaded

correctly and that the spray arms are free

to rotate.

2. Check that the water tap is opened.

3. Press the On/Off button. The dishwasher

must be in setting mode.

4. Press the button corresponding to the re-

quired programme (see ''Washing pro-

grammes'' chart).

When a programme has been selected

the corresponding light comes on.

The programme in progress indicator

light comes on.

Close the dishwasher door, the pro-

gramme starts automatically.

The programme in progress indicator

light remains on.

Setting and starting the programme with

delay start

1. Once selected the washing programme,

press the delay start button until the flash-

ing number of hours for the delay start

appear in the digital display. The start of

the selected washing programme can be

delayed for between 1 and 19 hours.

2. Close the dishwasher door, the count-

down starts automatically. The number in

the display is no longer flashing but fixed

with static light.

With the delay start function set, the

programme in progress indicator light

goes off. Once the countdown of the de-

lay start has elapsed, the washing pro-

gramme will start automatically and the

programme in progress indicator light

comes on.

3. The countdown will decrease with steps

of 1 hour.

4. The opening of the door will interrupt the

countdown. Close the door; the count-

down will continue from the point at

which it was interrupted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ATAG VA 6311 AF Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ATAG VA 6311 AF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info