Bedienungsanleitung ATAG VA6311NF (Seite 24 von 76) (Deutsch, Englisch, Holländisch, Französisch)

556997

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

• The remaining time to the end of the

washing programme

• The end of a washing programme (the

display shows a zero)

• The delay start time

• The alarm codes.

On/off button

Press this button to activate or deactivate

the appliance.

After ten minutes from the end of the wash-

ing programme, the Auto Off function auto-

matically deactivates the appliance. This

helps to decrease energy consumption.

Delay start button

Press this button again and again to delay

the start of the washing programme from 1

to 24 hours.

Programme buttons

Press one of these buttons to set a wash-

ing programme. The related indicator

comes on. Refer to 'Washing programmes'.

Function buttons

With these buttons you can:

• Adjust electronically the level of the water

softener. Refer to 'Setting the water soft-

ener'.

• Activate and deactivate the multitab func-

tion. Refer to 'Multitab function'.

• Activate and deactivate the rinse aid dis-

penser (only with the multitab function

on). Refer to 'What to do if...'.

• Cancel a washing programme in opera-

tion. Refer to 'Setting and starting a

washing programme'.

Setting mode

The appliance must be in setting mode

for these operations:

• To set and start a washing programme.

• To set and start a delay start.

• To adjust electronically the level of the

water softener.

• To activate or deactivate the multitab

function.

• To deactivate or activate the rinse aid

dispenser (only with the multitab function

on).

Activate the appliance. The appliance

is in setting mode when:

• All the programme indicators come on.

Activate the appliance. The appliance

is not in setting mode when:

• Only one programme indicator comes

on.

• The display shows the time of the wash-

ing programme or the time of the delay

start.

– It is necessary to cancel the pro-

gramme or the delay start to go back

to the setting mode. Refer to 'Setting

and starting a washing programme'.

Use of the appliance

1. Be sure that the set level of the water

softener agrees with the water hardness

in your area. If not, adjust the water

softener.

2. Fill the salt container with dishwasher

salt.

3. Fill the rinse aid dispenser with rinse aid.

4. Load cutlery and dishes into the appli-

ance.

5. Set the correct washing programme for

the type of load and soil.

6. Fill the detergent dispenser with the cor-

rect quantity of detergent.

7. Start the washing programme.

If you use the combi detergent tablets

('3 in 1', '4 in 1', '5 in 1'), use the multi-

tab function (refer to 'Multitab func-

tion').

Setting the water softener

The water softener removes minerals and

salts from the water supply. These minerals

and salts can cause damage to the appli-

ance.

Adjust the level of the water softener if this

does not agree with the water hardness in

your area.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ATAG VA6311NF Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ATAG VA6311NF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info