Bedienungsanleitung ATAG VA6311SF (Seite 19 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

556998

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Programme

Degree of soil

Type of load

Programme

phases

Duration

(min)

Energy

(kWh)

Water

(l)

Fresh soil

Crockery and

cutlery

Wash 60 °C

Rinse

30 0.8 9

Normal soil

Crockery and

cutlery

Prewash

Wash 50 °C

Rinses

Dry

160 - 180 0.8 - 0.9 9 - 10

Normal soil

Crockery and

cutlery

Prewash

Wash 50 °C

Rinses

Dry

200 - 220 1.1 - 1.2 9 - 11

1) The pressure and the temperature of the water , the variations of the mains supply, the options and the quantity of

dishes can change the programme duration and the consumption values.

2) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the

temperature and quantity of the water, the energy consumption and the programme duration.

3) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.

4) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery

with normal soil. (This is the standard programme for test institutes).

5) This is the most silent washing programme. The pump works at a very low speed to decrease the level of noise.

Because of the low speed, the programme duration is long.

Information for test institutes

For all the necessary information for test performance. send an email to:

info.test@dishwasher-production.com

Write down the product number (PNC) that is on the rating plate.

OPTIONS

Multitab option

Activate this option only when you use the

combi detergent tablets.

This option deactivates the flow of rinse aid

and salt. The related indicators are off.

The programme duration can increase.

Activating the multitab function

Activate or deactivate the multitab

function before the start of a pro-

gramme. You cannot activate or deac-

tivate this function while a programme

operates.

1. Press the on/off button to activate the

appliance.

2. Make sure that the appliance is in set-

ting mode. Refer to ‘SETTING AND

STARTING A PROGRAMME'.

3. Press and hold function buttons (D) and

(E) at the same time until the multitab in-

dicator comes on.

The function stays on until you deacti-

vate it. Press and hold function buttons

(D) and (E) at the same time until the

multitab indicator goes off.

If you stop to use the combi detergent

tablets, before you start to use

separately detergent, rinse aid and

dishwasher salt, do these steps:

1. Deactivate the multitab function.

2. Set the water softener to the highest

level.

3. Make sure that the salt container and

the rinse aid dispenser are full.

4. Start the shortest programme with a

rinsing phase, without detergent and

without dishes.

5. Adjust the water softener to the water

hardness in your area.

6. Adjust the released quantity of rinse aid.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ATAG VA6311SF Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info