Bedienungsanleitung ATAG VA6811QT (Seite 9 von 24) (Englisch)

557007

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Eco wash

This programme is intended for cleaning normally dirty dishes and

is the most effective programme in terms of combined energy

and water consumption.

The High temperature option must be selected to access the

programme used to compile the information for energy labelling.

Rinse & Dry

This programme comprises a rinse with heating and drying. This

is a suitable programme if, for example, you plan to make jam and

want to rinse and heat clean glass jars.

Rinse & Hold

Used to rinse dishes while you wait for the dishwasher to become

fully loaded.

SELECTING OPTIONS

To select an option, press one of the option buttons. The field

under the button lights when the option is activated. The available

options depend on the selected programme. Once you have

started the programme, the options you selected are saved for

the next time you use the same programme. An exception is the

Delayed start option.

High temperature

Activate this option for improved dishwashing results. The machine

then uses a higher temperature for the main wash.

If you want to use the lower temperature, press again so that the

field under the button turns off.

You can vary the temperature as shown below:

55 °C / 70 °CHeavy wash:

60 °C / 65 °CNormal wash:

60 °C / 65 °CDaily wash:

30 °C / 60 °CQuick wash:

30 °C / 60 °CSuper quick wash:

40 °C / 50 °CDelicate wash:

50 °C / 60 °CEco wash:

Long dry

A higher temperature in the final rinse and a longer drying phase

improves the drying result if you activate the Long dry option. This

causes a slight increase in energy consumption. This option can be

used with all programmes except Rinse & Dry and Rinse & Hold.

If you want a programme with Short dry, press again so that the

field under the button turns off.

Delayed start

When you select Delayed start, the dishwasher will start 1-24

hours after you press the Start/Stop button.

1 Press the button once to activate Delayed start. Press the

button several times – or hold it in – to set the desired number

of hours.

2 Press Start/Stop and the dishwasher counts down 1 hour at a

time and starts after the selected delay.

Press and hold Start/Stop for three seconds if you want to cancel

the Delayed start option.

NOTE!

Remember to press the Start/Stop button to start the

programme.

START THE DISHWASHER

Press and hold Start/Stop until the display shows (the door

open symbol). This indicates that the dishwasher is ready to start.

Close the door properly, otherwise the dishwasher will not start.

NOTE!

If the machine does not start within 2 minutes of the last button

press, the display returns to showing the last programme run.

TIME REMAINING

Once you have selected a programme and options, the display

indicates how long the programme took the last time it was used.

The remaining time is updated after the water for the final rinse

has been heated.

This may differ somewhat from time to time depending on the

temperature of the water supply, the amount of dishes, the

ambient temperature and other factors.

NOTE!

During the first run of each programme, the remaining time

displayed can be slightly misleading, as the dishwasher is estimating

the time. When you run the programme a second time, the

dishwasher will calculate the remaining time based on the

previous duration of the programme.

STOPPING OR CHANGING A PROGRAMME

If you want to change programme after starting the dishwasher,

open the door then press and hold Start/Stop for three seconds.

Add more detergent if the lid of the detergent dispenser has

opened. Then choose a new programme, press Start/Stop and

close the door.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ATAG VA6811QT Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ATAG VA6811QT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info