Bedienungsanleitung ATAG VA7015NT (Seite 17 von 24) (Englisch)

692635

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

ActionPossible causesProblem

Press and hold Start/Stop until the display shows

"Program started".

The Start/Stop start button has been pressed for

too short a time.

The dishwasher does not start.

Check.The door is not properly closed.

Close the door and wait. After a while, the

dishwasher continues the programme.

You have opened the dishwasher to add more

dishes while a programme is in progress.

Check the door lock. If it has not clicked into

place and locked, open the door.

The door lock has not clicked into place and

locked.

Press and hold the navigation button and

the option button Auto Open for five seconds.

Then wait 30 seconds. Close the door. Check

that the door lock clicks into place and locks and

that the dishwasher starts.

Check.A fuse/circuit breaker has been tripped.

Check.The plug is not plugged into the wall socket.

Check.The water tap is turned off.

Check.Overflow/leaks.

Turn off the water tap. Pull out the plug and call

the service department.

A whirring sound (the drainage pump) is heard

from the dishwasher and does not stop when the

main power switch is turned off.

Press and hold Start/Stop for three seconds if

you want to cancel the Delayed Start option.

Check that the Delayed Start option has not been

selected.

Check that the dishes are not blocking the spray

arms.

The spray arms do not rotate.The dishes are not clean.

Clean the spray arms. See the chapter Care and

cleaning.

Spray arm holes or bearings blocked.

Choose a longer programme.Unsuitable dishwashing programme.

Dose according to water hardness. Far too much

or far too little detergent results in poorer

dishwashing results.

Incorrect detergent dosage.

Avoid large packages.Old detergent. Detergent is a perishable product.

Do not cover porcelain with large bowls or the

like. Avoid placing very tall glasses in the corners

of the baskets.

Dishes loaded incorrectly.

Place dishes to sit steady.Glasses and cups have toppled over during the

programme.

Check that the filter handle is locked in the stop

position. The handle should point straight out

from the dishwasher.

The filters are not fitted correctly.

Check that the coloured stop on the right in the

bottom drain is in place. See the chapter Care

and cleaning.

Drainage pump stop missing.

Rinse off these types of foodstuffs if not starting

the dishwasher immediately. Use the Rinse &

hold programme.

Some foodstuffs, such as mustard, mayonnaise,

lemon, vinegar, salt and dressings, can mark

stainless steel if left for too long.

Spots on stainless steel or silver.

In order to avoid marks and tarnishing, separate

dishes made from different metals, such as silver,

stainless steel and aluminium.

All stainless steel can cause spots on silver if

they come into contact during dishwashing.

Aluminium can also cause spots on dishes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ATAG VA7015NT Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ATAG VA7015NT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info