Bedienungsanleitung ATAG VA7015NT (Seite 21 von 24) (Englisch)

692635

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Drainage connection

See the separate installation instructions for necessary information.

This dishwasher is suitable for installing in a raised recess (to attain

an ergonomic working height). This means that the dishwasher can be

placed so that the drainage hose runs to a lower level than the bottom

of the dishwasher, such as by routing it directly to a floor drain. The

dishwasher is fitted with an integrated anti-siphon device to prevent

the machine from being emptied of water during the wash cycle.

The drainage hose can also be connected to a connection nipple on

the sink unit's water trap. The connection nipple must have an internal

diameter of at least 14 mm.

The drainage hose may be extended by a maximum of 2.5 m (the total

length of the drainage hose must not exceed 4.5 m). Any joins and

connecting pipes must have an internal diameter of at least 14 mm.

However, the drainage hose should ideally be replaced with a new

hose without joins.

No part of the drainage hose may be more than 950 mm above the

bottom of the dishwasher.

Attach the drainage hose with a hose clamp. Ensure that the drainage

hose has no kinks.

Connection to water supply

Use only the inlet hose supplied with the dishwasher. Do not re-use

old or other spare hoses.

The supply pipe must be fitted with a water tap (stopcock). The water

tap must be easily accessible, so that the water can be shut off if the

dishwasher has to be moved.

Once the installation is complete, turn on the water tap and allow the

pressure to settle for a while. Check that all connections are watertight.

Connection to cold water supply

Connect the dishwasher to the cold water supply if the building is

heated using oil, electricity or gas.

Connection to hot water supply

Connect the dishwasher to the hot water supply (max. 70 °C) if the

building is heated using an energy-efficient means such as district

heating, solar power or geothermal power. Choosing a hot water

connection cuts dishwashing times and reduces the dishwasher's

energy consumption.

NOTE!

Do not exceed the permitted water supply temperature. Certain

materials used in some cookware cannot withstand strong heat. See

Fragile dishes in the chapter Loading the dishwasher.

Electrical connection

Information about the electrical connection can be found on the serial

number plate. This specification must match the electricity supply.

The dishwasher must be connected to an earthed socket.

The electric wall socket must be placed outside of the installation area

to be easily accessible after installing the dishwasher. Do not use an

extension cord!

NOTE!

Repairs and maintenance relating to safety or performance must be

carried out by a qualified professional.

Service

Read the chapter Troubleshooting before contacting the service

department. If you have encountered a problem that you cannot resolve,

please contact your nearest dealer.

When making contact, provide the details on the serial number plate.

Include the article number (1) and the serial number (2).

SERIAL NO.

ART. NO.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ATAG VA7015NT Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ATAG VA7015NT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info